Up to 3.8 MVA at 1,500 V TRANSFORMERLESS PV INVERTER WITH AN EXTRA THERMAL STABILITY AND A GREATER POWER DENSITY Greater power density This solar PV inverter achieves a market-leading power density of 492 kVA/m3, as it provides up to 3,825 kVA kVA in just one power stack. Latest generation electronics The INGECON® SUN 3Power C Series PV inverter features an innovative control unit that performs a more efficient and sophisticated inverter control, as it uses a last-generation digital signal processor. Liquid Cooling System (LCS) Ingeteam has already supplied +52 GW of liquid-cooled wind power converters worldwide. It offers a greater thermal stability and a more optimized component usage. The LCS has been designed to refrigerate the IGBTs, the power phases and the IP65 compartment. It features less moving components, so it consumes a lower amount of power and it requires less maintenance works. www.ingeteam.com [email protected] The LCS is a closed circuit supplied totally filled and purged, equipped with fast connectors with an anti-dripping system, so it offers zero risk of particle entrance. It has been designed to avoid siphons in order to easily purge it if necessary. The coolant used is a biodegradable glycol water mixture. There is no need of emptying the LCS in order to replace the phases, nor the sensors. IP65 protection A secondary liquid cooling system is used to refrigerate the air inside the IP65-protected compartment. A water-air heat exchanger is used for that. This compartment contains the power and control electronics, the DC fuses, the DC and AC protections, the busbars and the power phases.

Monitoring and communication Dual Ethernet to communicate with the SCADA and the PPC (power plant controller). Moreover, it features Wi-Fi communication as access point to connect with the inverter during commissioning and O&M works. Ingeteam’s advanced PV plant monitoring system INGECON® SUN Monitor is also available at no extra cost. The Smartphone application of the INGECON® SUN Monitor -available on the App Store and on the Play Store- makes it easier and more comfortable to monitor the PV plant. Advanced grid support Low Voltage Ride Through Fast Frequency Regulation Grid Following & Grid...

Input (DC) Recommended PV array power range(1) Voltage Range MPP(2) Maximum voltage(3) Maximum current Nº inputs with fuse-holders Fuse dimensions Connection to copper bars Power blocks Input protections Type II surge arresters (type I+II optional) Overvoltage protections DC switch Motorized DC load break disconnect Other protections Up to 24 pairs of DC fuses (optional) / Reverse polarity / Insulation failure monitoring / Anti-islanding protection Frequency Power Factor(5) Power Factor adjustable THD (Total Harmonic Distortion)(6) Output protections Overvoltage protections AC breaker Anti-islanding...

Ingeteam Power Technology, S.A. Avda. Ciudad de la Innovación, 13 31621 Sarriguren (Navarra) - Spain Tel.: +34 948 288 000 Fax: +34 948 288 001 e-mail: [email protected] Ingeteam S.r.l. Via Emilia Ponente, 232 48014 Castel Bolognese (RA) - Italy Tel.: +39 0546 651 490 Fax: +39 054 665 5391 e-mail: [email protected] Ingeteam SAS La Naurouze B - 140 rue Carmin 31670 Labège - France Tel.: +33 (0)5 61 25 00 00 Fax: +33 (0)5 61 25 00 11 e-mail: [email protected] Ingeteam INC. 3550 W. Canal St. Milwaukee, WI 53208 - USA Tel.: +1 (414) 934 4100 / +1 (855) 821 7190 Fax: +1 (414) 342...