LU ►► ROUND CONDUCTOR CLAMPING BRACKETS (IEC 62.561-4) Attachment clamps for 35 to 120 mm2 cable or 7 to 12,5 mm in diameter round conductor. ► applications Attaching and tightening of capture system conductors and external lightning protection systems. ■ Made of Cu / Zn (brass) alloy, stainless steel screws. ■ Pre-mounted models with different types of M6 and M8 clamps. ■ Corrosion resistant. Meets the environmental tests of IEC 62561-4. ■ Different attachment types depending on the type of structure: - Hollow wall (brick): Plug + lag screw model. - Solid wall (concrete): Metal plug + spike model. - Sheet metal: Self-tapping screws + leg model. Tools needed to install the M-6 spike model or M-8 metal plug: ■ Drilling machine ■ 6 or 8 mm drill bit (depending on the type of shank) ■ Punch, hammer and screwdriver 1. Make a hole in the wall using a drill with appropriate bit. 2. Put the metal plug into the hole Fig. 1. 3. With the plug in the hole, use a punch and a hammer so that the pin penetrates inside the heel towards the lower end of the plug, opening the legs to secure it. 4. Once the stud is securely attached, thread the stud and the bottom of the clamp Fig. 2, check that it is well threaded and the anchor is strong. 5. Insert the cable into the bottom of the bracket that is already fixed, and place the top piece of the same, securing it with the screws supplied Fig. 3 and 4. 6. Check that the cable is properly secured and tightened.

► technical specifications Description M6 clamp for 35mm2 M6 clamp for 50mm2 M6 clamp for 70mm2 M6 clamp for 95mm2 M8 clamp for 35mm2 M8 clamp for 50mm2 M8 clamp for 70mm2 M8 clamp for 95mm2 M8 clamp for 120mm2 Description Ref. Clamp w/ M6 conductor, cable 35mm2 118150 Clamp w/ M6 conductor, cable 50mm2 118099 Clamp w/ M6 conductor, cable 70mm2 118000 Clamp w/ M6 conductor, cable 95mm2 118100 Clamp w/ M8 conductor, cable 35mm2 118151 Clamp w/ M8 conductor, cable 50mm2 118083 Clamp w/ M8 conductor, cable 70mm2 118093 Clamp w/ M8 conductor, cable 95mm2 118092 Clamp w/ M8 conductor, cable 120mm2118202...

Clamp w/ M6 plug, cable 35mm2 Clamp w/ M6 plug, cable 50mm2 Clamp w/ M6 plug, cable 70mm2 Clamp w/ M6 plug, cable 95mm2 Clamp w/ M8 plug, cable 35mm2 Clamp w/ M8 plug, cable 50mm2 Clamp w/ M8 plug, cable 70mm2 Clamp w/ M8 plug, cable 95mm2 Clamp w/ M8 plug, cable 120mm 2 Description Clamp w/ foot for 35mm 2 Clamp w/ foot for 50mm 2 Clamp w/ foot for 70mm 2 Clamp w/ foot for 95mm 2 Clamp w/ foot for 120mm 2 Cardener 5 | 08223 Terrassa | Barcelona | Spain T 937 360 305 | T (+34) 937 360 314 [email protected] ROUND CONDUCTOR ATTACHING BRACKETS (IEC 62.561-4) ingesco.com