Early Streamer Emission Lightning Rod - PDC Remote LIGHTNING PROTECTION Remote TestingBluetooth High ProtectionClass I AISI 316LStainless Steel 200kATested ElectronicSystem Protection pdc.e 60 rt (At = 60ms) Total controlNo intermediaries Mobile AppiOS - Android 100%Efficiency DENA DESARROLLOS, S.L Protection radius calculated in accordance with standards NFC 17-102:2011, UNE 21186:2011 and NP 4426:2013, based on a 20 m difference in height between the lightning protection air terminal and the horizontal reference plane. Protection Radius Quality PDC.E 60 RT complies with all current regulations according to UNE 21186:2011 and NFC 17-102:2011 The testing device complies with IEC 62561-1:2023 standard and with electromagnetic compatibility requirements according to IEC 61000-6-2:2019 and IEC 61000-6-4:2019 standards. Our company holds ISO 9001:2015 certification and ISO 14001:2015 environmental certification. Latest-generation capacitive circuit and an atmospheric accelerator generating the upward leader. It has been tested by LABELEC (High Voltage Laboratory accredited by ENAC No. 307/LE681 according to ISO 17025) and has also been tested under natural field conditions. The INGESCO PDC.E 60 lightning rod includes an extended 5-year warranty against any manufacturing defect, offering effective performance under all types of atmospheric and environmental conditions. The remote testing module is subject to the standard warranty of its components: 3 years against manufacturing defects. Operating temperature range of the testing device: from -20°C to 50°C. © INGESCO ■ LIGHTNING SOLUTIONS

INSTALLATION INSTRUCTIONS IMPORTANT: Switch on the lightning rod testing device using the button located on the back of the unit. Before installing the lightning rod, download the app and register the device. Refer to the app manual for more information about the registration and configuration process. • The PDC.E 60 RT lightning rod is supplied with an integrated adapter for a 1M” mast (0 35.5 mm). • Pass the down conductor through the mast and connect it to the adapter base. Secure it using two Allen screws. • Orient the photovoltaic panel toward the sun (South in the northern hemisphere, North...