MULTIPLE LIGHTNING ROD ADAPTABLE TO MAST Multiple lightning rod adaptable to mast 1'W o 1'%". Central and lateral points mades of copper or stainless steel AISI 316, are integrated directly on the adapter head-mast. The adapter head mast is made of Cu/Zn (brass) with stainless steel hardware. There is the cable and plate version. ► operation Uses the point effect, the effect by which the electrical charges around a conductor accumulates in sharp points. • External protection of structures against lightning. • Forms part of the passive protection system, conductive mesh points and Faraday cages. • Easy installation. • Conductors are connected forming conductive mesh or Faraday cages. Multiple lightning Reference Material H (mm) D1 (mm) D2 (mm) D3 (mm) A (mm) Weight (g) rod adaptable 110021 Cu 110020 Cu 110025 Cu 110024 Cu 110019 Inox 110018 Inox 110023 Inox 110022 Inox

Direct mounting with an adapter head mast. Following the IEC 62305-3, the installation design is function of the protection level and the building must be covered by the protected volume according with, these 3 different methods. note 1. Not applicable beyond the values market with • . Only rolling sphere and mesh methods apply in these cases. note 2. (h) Is the height of air-termination above the reference plane of the area to be protected. note 3. The angle will not change for values of h below 2 m. b) Rolling sphere method and mesh method: Class of LPS Rolling sphere radius (m) Mesh size (m)...