► applications 0INGESCO LIGHTNING SOLUTIONS ►► LIGHTNING ROD + SUPPORT SET Assembly consisting of (specially sized) lightning rod tips with 1m. and 2 m. high flat base support. • Main tip: 500 mm L and 4 auxiliary tips. • Base made of copper-plated or a galvanized steel. • Tips made of copper. External protection of LPS (lightning protection systems). Installation is indicated for external protection of all types of structures, either as single collection system, or as a component of conductive mesh and Faraday cage systems. Dimensions approved for use in electrical substations. ► operation During the formation of the storm, an electro-atmospheric field is generated between cloud and ground. Around the Franklin tip, a natural ionization (corona) occurs, resulting from the energy transfer. This phenomenon is the beginning of excitation to draw a conducting channel which will facilitate the lightning discharge. ► characteristics & benefits ■ Easy installation. ■ No need to install mast or anchors. ► technical specifications Description Ref. Material H1 (mm) L (mm) H2 (mm) D1 (mm) A (mm) B (mm) D2 (mm) Weight (g) CU 1000 tip with 110003 Cu/cooper 1584 . , . plated steel CU 1000 tip with ZN steel support CU 2000 tip with ZN steel support 110096 Cu/cooper plated steel Cu/cooper plated steel

Installation on porches, decks or flat roofs. Attach base to structure with (018 mm.) screws. Depending on the structure to be protected and the level of protection required, IEC 62305-3 establishes the following methods for calculating the area of protection: note 1. Not applicable for values above those marked with . In these cases • only the rolling sphere and mesh methods apply. note 2. h (m) is the sensor height above the reference plane of the area to be protected. note 3. The protection angle does not vary for values below 2 m h. b) Rolling sphere and mesh method: SCPR Class Rolling sphere...