Winch & Hoist Catalog 2012
68Pages

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:33 Page1 Air Winches & Hoists From 125 kg to 200 t capacity

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:33 Page2 Air Winches & Hoists The most comprehensive range of Air Winches, Air Chain Hoists and BOP Handling Systems on the market – 0.125 t to 200 t capacity. Setting the standards in winch and hoist technology, our lifting equipment are known throughout the Heavy Industry, the Mining and Tunneling Industry, the Public Works and the Offshore Drilling Industry for their reliability and safety. 2 Air Winches & Hoists

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:34 Page4 Air Winches The Ingersoll Rand line of air winches combines the best ideas and innovations resulting from over 200 years of experience in solving the most challenging lifting, pulling and positioning applications in the world’s toughest industries. Our air winches are manufactured in either Douai, France (gear type motor winches) or Kent, Washington, USA (piston type motor winches). Enjoy the wide selection offered by these two lines and choose the model that best fits your application.

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:34 Page5 Liftstar® & Pullstar® Series Air Winches Designed to work in difficult environments, these winches feature a low maintenance, highly reliable gear motor with high torque output that translates into smooth starts and stops. Their rugged and compact design makes them ready to take on your most challenging applications. LIFTSTAR® (LS) models are designed for lifting applications with a 5:1 design factor at rated capacity. PULLSTAR® (PS) models are designed for pulling applications with a 3.5:1 design factor. They come...

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:34 Page6 Liftstar® & Pullstar® Series Air Winches 0.15 - 10 t Load Capacity LIFTSTAR® Lifting Series LIFTSTAR® winches are designed with a 5:1 minimum safety factor at rated capacity. LIFTSTAR® winch always lifts its rated capacity at any layers of rope. LIFTSTAR® winch is designed so that the line speed remains constant on all layers when lifting its nominal load. The drums are generously dimensioned to obtain a minimum drum to rope diameter of 18:1 to avoid excessive bending of the wire rope thus increasing its life time. The...

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:34 Page7 Liftstar® & Pullstar® Series Air Winches 0.15 - 10 t Load Capacity Reliable and safe, this modern range of winches is designed for harsh environments. They can be equipped with many options for effective adaptation to your application (see pages 9 and 10 for details). See dimensions on page 11. LS5000RGC-L-CE LS2-600R-L-CE LS1500RGC-L-CE Specifications at 6.3 bar dynamic pressure (when winch is running) — Working pressure range 5 to 7 bar. As per European standard EN 14492-1 – Group of mechanism as per FEM 1Bm / ISO M3....

Liftstar® & Pullstar® Series Air Winches PULLSTAR® Pulling Air Winches Intended for use on horizontal surfaces with no or insubstantial inclination, the PULLSTAR® winches are fitted as standard with a free spooling clutch for rapid manual rope unwinding. Specifications at 6.3 bar dynamic pressure - Working pressure range 5 to 7 bar. As per European standard EN 14492-1 - Croup of mechanism as per FEM 1 Bm / ISO M3. (1) Measured with recommended rope diameter (see table below). (2) For PS4000RCC, line pulls are reduced by 10% and line speeds are increased by 10%. Rope capacity with...

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:36 Page9 Liftstar® & Pullstar® Series Air Winches 0.15 - 10 t Load Capacity Liftstar® Pullstar® Main options for both Portable and Heavy Series Drum guard on PS2400R Limit switches on LS5000R Limit switches on LS600R LS5000R with emergency stop LS2000R with overload protection Emergency stop Allows the operator to quickly and safely stop the winch in case of an emergency situation. Pressing the e-stop button closes a shut-off valve which stops the main air from entering into the motor, brake is applied automatically Delivered as...

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:36 Page10 Liftstar® & Pullstar® Series Air Winches 0.15 - 10 t Load Capacity LIFTSTAR® and PULLSTAR® Series Ordering Menu To order your winch, specify complete model number code as shown below: LIFTSTAR® lifting winches in CE version are fitted as standard with: drum guard — pneumatic overload protection device — emergency stop valve (main air shut-off) — rotary limit switches (top and bottom). PULLSTAR® pulling winches in CE version are fitted as standard with drum guard and emergency stop valve (main air shut-off). LIFTSTAR® and...

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:36 Page11 Liftstar® & Pullstar® Series Air Winches 0.15 - 10 t Load Capacity 155 311 155 311 140 296 140 296 461 617 427 583 155 311 155 311 140 296 140 296 Limit switches (standard on LIFTSTAR CE models) Rope entry C 369 516 392 548 Ø 231 120 Non CE Models LS2-300R, LS2-600R LS2-300RGC, LS2-600RGC PS2-1000R PS2-1000RGC A B = 287 = 248 428 248 428 563 743 495 675 180 360 180 360 248 428 248 428 441 621 509 689 A B Ø 290 Ø 180 167 10 C 302 485 302 485 449 634 449 634 952 1137 794 979 302 485 302 485 449 634 449 634 Emergency stop...

Air Winch & Hoist Catalog 2012-ENG32725_68 pages 27/07/12 10:36 Page12 Liftstar® & Pullstar® Series Air Winches 0.15 - 10 t Load Capacity LS2-150RLP Dedicated ManRider™ The LS2-150RLP pneumatic ManRiding winch is specially designed for safe and reliable personnel lifting operations by means of a safety harness on offshore rigs and platforms in a heavy duty and critical offshore working environment. It is designed to meet the latest NPD and European machinery directives and is type approved by DNV. It is delivered with the CE mark and an EC declaration of conformity. Features: LS2-150RLP-L-E...