Catalogs >
Ingersoll Rand >
Pneumatic industrial drills

Pneumatic industrial drills
12Pages

Catalog excerpts

Ingersoll Rand, Pneumatic Industrial Drills 0.4-0.7hp Ingersoll Rand,

015 040 020 055 S = Adjustable 030 070 02 = 0.2 HP # x 100 rpm Shutoff D = Drill A = 1/4” Chuck Q2 040 090 05 = 0.5 HP B = 3/8” Chuck D = Stall 055 C = 3/16” Collet, 9/32”-40 G = Pistol Male Thread L = Inline 1 = Non-reversible E = 5/16”-24 Female Thread R = 90˚ Angle Inline Inline 2 = Reversible L = 3/8” Keyless Chuck A = 45˚ Angle 012 025 3 = Non-reversible P = 3/8”-24 Male Thread 015 030 (no chuck) 020 040 T = 1/4”-28 Female Thread 027 055 046 055 070 Q04 = 1/4” Quick Angle 090 Pistol = 25 mm Head Change 25 05 = 500 P 1 = 1/4” Chuck L = Long 115 Inline = 28 mm Head 28 08 = 850 S 2 = S04...

Open the catalog to page 2

0.4 & 0.5 Horsepower Industrial Drills5 & 6 SeriesDurability and performance are the hallmarks of these proven winners. Features • Stall Torque: 20 - 320.4in-lbs (2.3 - 36.2Nm) • Speeds: 350 - 20,000rpm • Power: 0.40hp • Variable speed control allows slow starting and high speed for fast drilling • Skinsulate housing for operator comfort and productivity • Excellent power-to-weight ratio gets the job done with less fatigue Accessories: Piped away exhaust kit: 5L-K184 Horizontal hanger: 5RA-A365 Chuck: 6A-99 Dead handle: 728N-A48, (requires 2): 5A-49 Kits: Tune-up kit: 5RA/5RL-TK1 (continued...

Open the catalog to page 3

C LEVER START (90° CHUCK) C LEVER START (90° SMALL ANGLE HEAD) |LEVER START (45° SALL ANGLE HEAD) C LEVER START (90° CHUCK) C LEVER START (90° SMALL ANGLE HEAD) Durability and performance are the hallmarks of these proven winners. Features ' -r: • Stall Torque: 10 - 270 in-lbs (1.13 - 30.5 Nm) • Speeds: 600 - 20,000 rpm • Power: 0.75 hp • Skinsulate housing for operator comfort and productivity • Cantilever-mounted planetary gears are easily accessible without need to press from gear frame, simplifies maintenance • Excellent power-to-weight ratio gets the job done with less fatigue Model...

Open the catalog to page 4

The 7800 series drills offer enough power for your toughest applications. 7846-E • Stall Torque: 48 – 654in-lbs (5.4 – 74Nm) • Speeds: 325 – 4500rpm • Excellent for production-line drilling of large diameter holes • ouble row ball bearing construction assures max TIR of .005” for precise, D concentric holes • Side handle on 350/600rpm models PISTOL TRIGGER START Service Accessories: SWL Spindle accessories, see page 185 Swivel air inlet, see page 186 728 Series 28 Series drills are economical general purpose 7 drills ideal for most maintenance applications. • Stall Torque: 30 – 120in-lbs...

Open the catalog to page 5

Selection Chart Suggested surface speeds for high-speed steel drills in various materials. Alloy steel (300 to 400 Brinnel) Stainless steel Automotive steel forgings Tool steel, 1.2C Steel, .4C to .5C Mild machinery, .2C to .3C Hard-chilled cast iron Medium-hard cast iron Soft cast iron Malleable iron Monel metal High tensile-strength bronze Ordinary brass and bronze Aluminum and its alloys Magnesium and its alloys Slate, marble and stone Bakelite and similar material Wood Note: Carbon-steel twist drills should be run at speeds of 40 to 50 percent of those given above. Drilling Speed (rpm)...

Open the catalog to page 6

Suggested Tightening Torque Table Torque Values for Nonferrous The following suggested tightening torques provide an excellent starting point for determining torque requirements. Threaded Fasteners Remember, you may need to increase or reduce these numbers based on the individual joint. Size Stainless Steel Brass Bronze 2024-T4 Stainless Steel Monel Nylon VALUES (IN-LBS) This table is offered as the suggested maximum torquing values for threaded products and is only a guide. Actual tests were conducted on dry or near-dry products. Mating parts were wiped clean of...

Open the catalog to page 7

Take advantage of our extensive line of accessories to optimize your assembly operations and maximize your productivity. From Torque Reaction Arms and Torque Tubes to Spindle Accessories and Spring Balancers, we have options to complement your work cells and improve your ergonomics and efficiency Whether a single, handheld application or a sophisticated set of custom engineered systems, we have the tools and accessories to meet your requirements and the global network of service and solutions providers capable of meeting your needs for application studies, line audits, design, project...

Open the catalog to page 8

Spring Balancers Cable • Self-lubricating bushings • Adjustable capacity and stroke limiting device • Auxiliary safety suspension • afety device prevents dropping of load due S to spring breakage (except on BMDS-2) • Anti-friction cable guide • Adjustable stroke-limiting device (1) Locking type balancer. Workstations & Torque Tubes Light-Duty Workstations These steel-constructed, lightweight workstations offer the operator flexibility while supporting the tool weight. Add a torque absorber rod to help relieve minor torque reaction. Part Number Air tool station with torque absorber Electric...

Open the catalog to page 9

Part Number Chuck Size Thread Size Key DRILL CHUCKS KEYLESS CHUCKS STANDARD DUTY CHUCKS MEDIUM DUTY CHUCKS HEAVY DUTY CHUCKS Square Drive Female Hex Chuck Size Female Part Number Ingersoll Rand.

Open the catalog to page 10

Ergo Grips / Bio Grips / Comfort Grips Work Gloves | Part Number Used With: Standard black, extra large Thunder gun series, large Titanium series, large REPLACEMENT FOAM GRIP KITS Part Number Inlet CFM Type Part Number Description CLASS 1 #10 OILS FOR AIR TOOLS Angle Head Boots 66 1 LB #66 - 1 lb - slow-speed angle heads 67-4T #67 - 4 oz tube - high-speed angle heads 67-1 LB #67 - 1 lb - high-speed angle heads 67 8 LB #67 - 8 lb - high-speed angle heads Based on tool angle head diameter Polyurethane Coil Hoses Part Number Description P12-10R 1/2" x 10'...

Open the catalog to page 11

Ingersoll Rand, Ingersoll Rand (NYSE:IR) advances the quality of life by creating comfortable, sustainable and efficient environments. Our people and our family of brands—including Club Car®, Ingersoll Rand®, Thermo King® and Trane®—work together to enhance the quality and comfort of air in homes and buildings; transport and protect food and perishables; and increase industrial productivity and efficiency. We are a $13 billion global business committed to a world of sustainable progress and enduring results. He THERMO KING irtools.com © 2016 Ingersoll Rand IRITS-0516-054 We are committed to...

Open the catalog to page 12