Infinity FA5i Dual-Purpose Air Winches 3,123-5,000 kg (6,870-11,000 lb) Manual drum brake or optional auto drum or auto disc brake Adjustable drum guard comes standard on all dual purpose winches Lifting lugs designed for lifting weight of winch plus full drum of wire rope Self-cleaning K5C2 control valve improves flow and performance. Minimum 18:1 drum diameter to wire rope diameter Gearbox-indrum design reduces size and helps the winch fit in compact applications Fabricated steel frame provides maximum durability Lift-to-Shift variable speed lever provides precise control and built-in safety Radial piston air motor provides reliable power with adjustable speed for any use

Infinity FA5i Dual-Purpose Air Winches 3,123-5,000 kg (6,870-11,000 lb) Ingersoll Rand Dual Purpose winches are designed to maximize the use of your equipment. They combine the time-tested, rugged durability of our standard Infinity winches with enhanced safety features for lifting personnel. In environments where dedicated Man Rider® winches are not required, Ingersoll Rand Dual Purpose winches offer you the versatility to lift people and material with one winch. Often copied, but never equaled, count on Ingersoll Rand Dual Purpose winches to get the job done. Bolt Down "A" Dimension Bolt Down...

General Performance (Personnel Lifting). Performance based on a 8:1 design factor General Performance (Utility Lifting). Performance based on a 5:1 design factor Recommended minimum breaking force of wire rope based on top layer line pull rating. Drum Capacity is based on tightly wound wire rope and 1/2" freeboad from the top of the flange to the top layer. Recommended drum working capacity is 80% of values shown. Max storage capacity is tightly wound with no freeboard.

NOTE: (1) Add 1 for filter, 2 for lubricator, 3 for regulator (e.g. J12). For protection during shipment and due to the wide range of installation variables, the airline accessories are shipped loose for client installation. (2) M1 - Material traceability certificates according to EN 10204 (Ex DIN 50049) 2.2 on load bearing parts. This conformity document affirms (by the manufacturer) that parts are in compliance with the requirements of the order based on non-specific inspection and testing (i.e., results are typical material properties for these parts). M2 - Material traceability certificates...