Accessories Catalogue
44Pages

{{requestButtons}}

Catalog excerpts

Accessories Catalogue - 1

Accessories Airline & Tool Accessories Get the most out of your tools

Open the catalog to page 1
Accessories Catalogue - 2

Airline Accessories Featuring products for air preparation, including FRLs, hoses, couplings and plugs. ARO-Flo Series Filters, Regulators, Lubricators Super Duty Series Filters, Regulators, Lubricators Special Airline Products Fittings & Valves Quick Release Couplings & Nipples Hoses, Mufflers, Blow Guns Item Year Capacity Stroke Net weight

Open the catalog to page 2
Accessories Catalogue - 3

ARO-Flo Series For more than 100 years, Ingersoll Rand has been an industry leader in the design and manufacture of compressors, pneumatic tools, and air preparation equipment. Clean air is a key ingredient that enables effective and efficient operation of tools and machinery. The use of air preparation devices, such as filters, regulators and lubricators is an excellent way of keeping your tools and equipment to operate at their peak performance. The new ARO-Flo Series continue the tradition of offering premium products for your operating. Performance ARO-Flo Series FRLs set the standard...

Open the catalog to page 3
Accessories Catalogue - 4

Installation For best performance the flow required for your tool or equipment shall be matched with ARO-Flo capacity. When installing FRL observe the order shown in the illustration. Individual take-off lines to the FRL should be from the top of the compressed air supply line. Observe air flow direction marks on FRLs. To trap and expel water and contaminants, drip leg drains should be installed at low points in air distribution system and at its far end. If a coalescing filter is required, it should be installed downstream from a standard filter. (2) Numbers in brackets are given for...

Open the catalog to page 4
Accessories Catalogue - 5

ARO-Flo Filters ARO-Flo compressed air filters are designed to remove airborne solid and liquid contaminants which may plug small orifices and hinder performance, or cause excessive wear and premature equipment failure. Standard filters are supplied with 5-micron elements. 40-micron elements can be purchased and installed separately. Coalescing models are capable of removing oil aerosols and particles down to 0.3 micron. All filters have aluminium body, nitrile seals and acetal baffle. Drain: brass + nitrile (manual), acetal (automatic). Filter insert from Polyethylene (or HEPA paper + felt...

Open the catalog to page 5
Accessories Catalogue - 6

ARO-Flo Lubricators ARO-Flo mist-type lubricators are designed to provide the correct amount of oil required for most general applications in a pneumatic system, delivering a constant ratio of oil to air flow. Precise oil feed adjustment sets the proper oil drip rate. Lubricators should be installed close to the downstream application to ensure effective distribution of oil. All lubricators are with aluminium body, nitrile seals, nylon sight dome and urethane inlet tube. Oil refill can be done under pressure. (1000 Series) (1500 Series) (2000 Series) Series Port size Adjustment option (1=...

Open the catalog to page 6
Accessories Catalogue - 7

ARO-Flo 2 and 3 Piece Combination Units Filters, regulators, lubricators and piggybacks can be combined together. They are typically strung together in the F+R+L arrangement (three-piece combo) and F/R+L (two-piece combo) arrangement, although other configurations are also used depending on application needs. All ARO- Flo Combinations have a 5 micron filter element and a relieving regulator 0-9.6 bar (0-140 psig) with flush mount gauge. They are supplied assembled with modular T-shape wall mount bracket kits. The panel nuts are not included with units. They must be ordered separately if...

Open the catalog to page 7
Accessories Catalogue - 8

(1) For series 2000 with 3/4" thread, use modular clamp 104397 or T-type wall mount bracket /spacer 104402. (2) Optional 0 1.5" (38 mm) face mount gauge with polycarbonate lens and NPT 1/8" thread: part no. 104493: 0-11 bar (0-160 psig) - part no. 104492: 0-5 bar (0-75 psig) - part no. 104491: 0-3 bar (0-45 psig). T-bracket / spacer ARO-Flo Series Spare Parts Description Regulator service kit (relieving) Lubricator polycarbonate bowl with guard (3) Sight glass is not supplied with the 1000 Series.

Open the catalog to page 8
Accessories Catalogue - 9

ARO-Flo Series Dimensions 2-piece combined units 3-piece combined units download.irtools.eu

Open the catalog to page 9
Accessories Catalogue - 10

ARO-Flo Series Air Filters, Regulators & Lubricators ARO-Flo Series Flow Charts 1000 Series Regulator 1/4" pressure drop test Inlet Pressure - 6.9 bar (100 psig) 4.1 bar 2.4 bar (60 psig) (35 psig) 6.2 bar (90 psig) Secondary pressure (psig) Inlet Pressure Lubricator 1/4" pressure drop test Filter 1/4" pressure drop test Regulator 3/8" pressure drop test Inlet Pressure - 6.9 bar (100 psig) Secondary pressure (psig) Inlet Pressure Lubricator 3/8" pressure drop test Filter 3/8" pressure drop test Filter 1/2" & 3/4" pressure drop test Regulator 1/2" & 3/4" pressure drop test 2.4 bar Inlet...

Open the catalog to page 10
Accessories Catalogue - 11

ARO-Flo Series Air Filters, Regulators & Lubricators Air Treatment ARO-Flo Series Flow Charts 1000 Series Piggyback 1/4" pressure drop test Inlet Pressure - 6.9 bar (100 psig) Inlet Pressure - 6.9 bar (100 psig) Secondary pressure (psig) Inlet Pressure - 6.9 bar (100 psig) Secondary pressure (psig) F+R+L 1/4" pressure drop test Secondary pressure (bar) Secondary pressure (psig) F/R+L 1/4" pressure drop test Piggyback 3/8" pressure drop test F/R+L 3/8" pressure drop test Secondary pressure (psig) Inlet Pressure - 100 psig (6.9 bar) Inlet Pressure - 100 psig (6.9 bar) Inlet Pressure - 6.9 bar...

Open the catalog to page 11
Accessories Catalogue - 12

Super Duty Filters • High-flow filter element with 5-micron filtration. • Differential pressure indicator to eliminate the guesswork of element replacement. • Robust cast aluminium housings to withstand operating pressures up to 20.7 bar (300 psig). Maximum supply pressure limited to 10.3 bar (150 psig) with pressure indicator. • All filters have plated steel internal components and fluorocarbon seals. Filter insert from polyethylene/polypropylene. • Weight: 8.7 kg (all models). (1) At 10.3 bar (150 psig) inlet pressure. Pressure drop of 0.3 bar (5 psig). Operating temperature: 0 - 65°C....

Open the catalog to page 12
Accessories Catalogue - 13

Super Duty Lubricators L365H1-110 • Full view sight dome. • Siphon tube filter provides clean lubricant downstream. • Adjustable oil feed. • Standard transparent bowl with metal bowl guard. • Can be filled while under pressure - Max 13.8 bar at inlet. • Lubricator body in zinc. Fluorocarbon seals. Sight dome in nylon. • L365J1-110 and L36591-110: 4.6 kg. Other models: 4.3 kg. (4) At 8 bar (120 psig) inlet pressure. Pressure drop of 0.3 bar (5 psig) Operating temperature: 0 - 65°C. Air Treatment Super Duty Series Flow Charts 1 !/4" Series Filter 1 W pressure drop test Regulator 1 W pressure...

Open the catalog to page 13

All Ingersoll Rand catalogs and technical brochures

  1. QX Series™

    16 Pages

  2. Zero Gravity

    2 Pages

  3. 259

    2 Pages

  4. EPL product

    15 Pages

  5. Main rider

    8 Pages

  6. 2145QIMAX

    3 Pages

  7. 529 Saw

    2 Pages

Archived catalogs

  1. QC Qualifier

    21 Pages