Catalog excerpts
Swiss Cat (Milling) CAT-016 7809991 10/22/09 4:35 PM Printed in Israel Page 1
Open the catalog to page 1Swiss Cat (Milling) 10/22/09 11:33 AM Page 3 Diameter D.O.C. Description Series Page .375-.625” .380.600” Drill-Mill Tip 45D 23 .375-.625” .380.600” Flat Bottom Plunge Center 45V 24 .250-.750” .200.620” High Precision Helical Ball Nose TIp 45B, 47B 25, 26 .312-.750” .200.500” High Precision Helical Ball Nose Tip for Aluminum 45B 27 .390-.625” .140.290” Chamfer and Spotting Tip 45N, 45M, 45P 28 .394-.630” .425.560” Solid Carbide Corner Rounding 45R 29 .125-.250” .161.322” Center Drill 45Z 30 .394-.630” .252.500” Thread Mill 47Y 31 .50-1.00” .056.375” Precision T-Slot Milling Tip 18T 32 .625”...
Open the catalog to page 3equipped with modular Chip-Surfer offered with cylindrical shanks for High-shear double-positive geometry
Open the catalog to page 4Center Cutting Variable Pitch Center Cutting Non-Center Cutting High Precision Helical Ball Nose Flat Bottom Precision T-Slot Thread Mill Center Drill Modular Milling System for Swiss and Live Tooling Applications Solid Integral ER Collet Shanks Connection Chart End Mill Size Connection Size Reduced Diameter Shanks Straight Shanks Necked-Down Straight Shanks
Open the catalog to page 5INTEGRAL ER-ADAPTOR Thread Connections Thread Size When assembling, be sure the carbide tip is seated firmly on the shank with no gap. Note: DO NOT apply lubricantto the thread connection.
Open the catalog to page 6REDUCED DIAMETER SHANKS FOR ER11 AND Thread Size STRAIGHT SHANKS WITH NO NECK FOR ER11 AND Thread Size For information about Standard Toolholder Catalog When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection.
Open the catalog to page 7' STRAIGHT SHANKS WITH NO NECK SERIES so Thread Connections Shank Materials Carbide, Steel, Heavy Metal Thread Size CARBIDE SHANKS STEEL SHANKS HEAVY METAL SHANKS W/COOLANT When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection.
Open the catalog to page 9Extension Length Thread Size Female Thread Wrench (Not included with carbide tip or shank purchase). Torque Wrench When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Torque Value
Open the catalog to page 10■ SmO£@&. 0° END MILL SERIES I2JID Diameters Cutting Edge Length Insert Corner Cutter Number
Open the catalog to page 12'" Cutter body should be relieved to accept .062"R Insert. For technical Information, see page 42.
Open the catalog to page 14Swiss Cat (Milling) 10/22/09 11:49 AM ■ Page 15 ROUGH-FIN SOLID CARBIDE END MILL TIP SERIES 47C, 47D (0˚ LEAD, 45˚ HELIX, CENTER CUTTING FOR ROUGHING & FINISHING) Diameters Grade Corner .312" to .750" IN2005 Chamfer & Radius Channeling Shoulder Ramping Facing L1 Smooth flute T1 D1 e9 C Serrated flute Cutter Number D1 Nominal Diameter 47C-3120TQRU01 47C-3727T6RU01 47D-3727T6RU03 47C-5037T8RU01 47D-5037T8RU03 47C-6247TRRU02 47D-6247TRRU06 47C-7562TSRU02 47D-7562TSRU06 .312 .375 .375 .500 .500 .625 .625 .750 .750 Wrench Pocketing Corkscrew L2 Eff. L1 Cutting Edge Length T1 Thread Size L2...
Open the catalog to page 15SOLID CARBIDE SERRATED ROUGHING TIP SERIES 47c,4sc (0° LEAD, 45° HELIX, CENTER CUTTING) mping Corkscrew Pocketing Cutting Edge Length Corner Angle Wrench (Not included with carbide tip or shank purchase). Torque Wrench When assembling, be sure carbide tip is seated firmly on shank with no gap. For technical information, see page 38. Note: DO NOT apply lubricant to the thread connection.
Open the catalog to page 16Swiss Cat (Milling) 10/22/09 11:49 AM ■ Page 17 SOLID CARBIDE CENTER CUTTING END MILL TIP SERIES 46J, 46D (0˚ LEAD, 45˚ HELIX, HIGH PRECISION) Diameters Grade Corner .312" to .500" IN2005 Sharp, .015", .031" and .062"R Shoulder Channeling Pocketing Corkscrew Ramping Facing T L2 D1 (e8) L1 R Cutter Number Eff. D1 Nominal Diameter L1 Cutting Edge Length T1 Thread Size L2 Extension Length R Corner Radius 3 3 3 3 3 3 3 3 3 3 .312 .312 .375 .375 .375 .375 .500 .500 .500 .500 .20 .20 .27 .27 .27 .27 .37 .37 .37 .37 T05 T05 T06 T06 T06 T06 T08 T08 T08 T08 .39 .39 .50 .50 .50 .50 .65 .65 .65 .65...
Open the catalog to page 17Swiss Cat (Milling) 10/22/09 11:49 AM ■ Page 18 END MILL TIP - 0 LEAD, 45 HELIX, CENTER CUTTING SERIES 47J Diameters Max. Depth of Cut Insert Corner 0.250" 0.20" Sharp Pocketing Channeling Corkscrew Ramping L2 T1 L1 D1 (e8) R Part Number 47J-2520TQRD04 Wrench 45 D1 Nominal Diameter Eff. L1 Length of Cut T1 Thread Size L2 Extension Length R Corner 0.250 4 0.20 T5 0.39 Sharp (Not included with carbide tip or shank purchase). Thread Size T05 Wrench Part No. Optional Torque Wrench Torque Value (in. lbs.) WS-0043 DT-60-06 60 When assembling, be sure carbide tip is seated firmly on shank with no...
Open the catalog to page 18SOLID CARBIDE END MILL TIP-VARIABLE PITCH (0° LEAD, 38° HELIX, CENTER CUTTING) Diameters Grade Insert Corner Thread Size Wrench (Not included with carbide tip or shank purchase). Torque Wrench Torque Value When assembling, be sure carbide tip is seated firmly on shank with no gap. For technical information, see page 38. Note: DO NOT apply lubricantto the thread connection.
Open the catalog to page 20Swiss Cat (Milling) 10/22/09 11:49 AM ■ Page 23 DRILL-MILL TIP SERIES 45D Diameters Grade Corner .375" to .625" IN2005 .015"R Std. Bottom Drill Shoulder Ramping Pocketing Channeling T1 D1 D2 L1 L2 R Cutter Number 45D-3738T6RA01 45D-5045T8RA01 45D-6263TRRA01 Eff. D1 Nominal Diameter D2 Flange Diameter T1 Thread Size L1 Edge Length L2 Extension Length R Corner Radius 2 2 2 .375 .500 .625 .35 .48 .60 T06 T08 T10 .38 .45 .60 .48 .60 .75 .015 .015 .015 *Drill depth not to exceed 2/3 edge length. Wrench (Not included with carbide tip or shank purchase). Thread Size Wrench Part No. Optional Torque...
Open the catalog to page 23FLAT BOTTOM PLUNGE CUTTER SERIES45V *lf used for spot facing, drilling or boring, drill depth not to exceed 2/3 edge length. Wrench (Not included with carbide tip or shank purchase). Torque Wrench Torque Value When assembling, be sure carbide tip is seated firmly on shank with no gap. For technical information, see page 38. Note: DO NOT apply lubricantto the thread connection.
Open the catalog to page 24All Ingersoll Cutting Tools catalogs and technical brochures
-
Slotters
16 Pages
-
Solid Carbide
64 Pages
-
END MILLS
58 Pages
-
Gold-Rush Catalog
13 Pages
-
HI-POS+
45 Pages
-
quadtwist
11 Pages
-
GOLD RUSH
12 Pages
-
gold max 4 slotters
5 Pages
-
EVOTEC Series 1SJ1Y
4 Pages
-
gold max 4
3 Pages
-
gold max 4 New
3 Pages
-
Plunge Cutters
20 Pages
-
ChipSurfer & Solid Carbide Cat.
116 Pages
-
IT.TE.DI. PCD/CBN MILLING
68 Pages
-
Holemaking Section
46 Pages
-
Turning Section
160 Pages
-
Milling Section
94 Pages
-
Fine Gold
302 Pages
-
D'Andrea Precision Boring (INCH)
187 Pages
-
Form-Master Pro
6 Pages
-
Form-Master Cera Brochure
4 Pages
-
Form-Master Speed
6 Pages
-
Gold-Rush Catalog
1440 Pages
-
New Gold Catalog
176 Pages
-
Image Brochure
13 Pages
-
BTA DRILLS
110 Pages
-
Power-Feed+
6 Pages
-
Form-Master Wave Button
8 Pages
-
Finish-Ball
6 Pages
-
Plunging Cutters Brochure
20 Pages
-
Hi-Pos Deka Family
12 Pages
-
Chip-Surfer & Solid Carbide Catalog
116 Pages
-
Super Catalog - Hole Making Products
166 Pages
-
2008 Product Update
60 Pages
-
Super Catalog - Toolholders
44 Pages
-
Super Catalog - Turning Products
366 Pages
Archived catalogs
-
Super Catalog - Milling Products
546 Pages
-
Hole Making Catalog
124 Pages
-
Milling Catalog
430 Pages
-
Face Mills
69 Pages
-
End Mills
123 Pages