Solid Carbide
64Pages

{{requestButtons}}

Catalog excerpts

Solid Carbide - 3

0° Lead, 45° Helix, Center Cutting for Roughing & Finishing 47C, 47D Rough-fin Solid Carbide End Mill Tip 0° Lead, 45° Helix, Center Cutting 47C, 48C Solid Carbide Serrated Roughing Tip 0° Lead, 45° Helix, High Precision 46J, 46D Solid Carbide Center Cutting End Mill Tip 0° Lead, 38° Helix, Center Cutting 47J, 47D, 47C Solid Carbide End Mill Tip, Variable Pitch 0° Lead, 45° Helix, High Precision 47J, 47D Solid Carbide Center Cutting End Mill Tip 0° Lead, 45° Helix, Center Cutting 0° Lead, 45° Helix, Not Center Cutting 48D, 48J, 49D, 49J Solid Carbide Finishing End Mill Tip 0° Lead, 45°...

Open the catalog to page 3
Solid Carbide - 4

Cutting Depth High Feed Roughing, Center Cutting 45A Solid Carbide Ultra High Feed Tip High Feed Roughing, Center Cutting 47A, 48A 4 & 6 Flute High Feed Tip OMiGQ Back Draft Finishing, Not Center Cutting 48U Solid Carbide Backdraft Toroidal Straight Ball Nose High Precision Tip for Hardened Steel Straight Ball Nose 45X Straight Ball Nose Tip attiPQ(=snzZFM3: Helical Ball Nose High Precision Ball Nose Tip Helical Ball Nose High Precision Ball Nose Tip Helical Ball Nose 45B Helical Ball Nose Tip for Aluminum

Open the catalog to page 4
Solid Carbide - 5

Cutting Depth 45° Helix, Not Center Cutting 47N, 48N Solid Carbide Chamfer and Countersink 45R Solid Carbide Corner Rounding Tip 18T Front/Back Chamfer, V-Form Tip 18T Precision T-Slot Milling Tip Solid Carbide Thread Milling Tip 120° Included Point Angle, 10° - 15° Helical Flute, Center Drill Necked Down Straight Shanks 1SJ1Y (Chip Surfer Style)

Open the catalog to page 5
Solid Carbide - 6

Cutting Depth Roughing End Mills, 3-flute, 38° Helix, w/Chipsplitters Precision End Mills, Medium and Long Length, 45° Helix Precision End Mills for Aluminum, 45° Helix Conical Shanks Straight Shank, No Neck Integral ER-Adaptor Ball Nose Blanks T-Slot Preform Blanks

Open the catalog to page 6
Solid Carbide - 7

Precision Center-Cutting End Mills, 2-Flute, 30° Helix Precision Center-cutting End Mills, 4 Flute, 38° Helix Precision Center-cutting End Mills, 3 Flute, 38° Helix Solid Carbide End Mills for Roughing & Finishing, Variable Pitch Solid Carbide End Mills for Aluminum, 3-Flute, Variable Helix Solid Carbide End Mills, Combination Roughing/Finishing 4 & 5 Flute Hi Feed Roughing End Mill w/ Variable Pitch & Chip Splitters Bull Nose Solid Carbide End Mills, 2 Flutes Hi Feed Solid Carbide End Mills, 4 Flutes Cutting Depth Ball Nose Solid Carbide End Mills, Multi-purpose

Open the catalog to page 7
Solid Carbide - 9

ROUGH-FIN SOLID CARBIDE END MILL TIP - 47C, 47D 0° LEAD, 45° HELIX, CENTER CUTTING FOR ROUGHING & FINISHING Smooth flute Cutter Number Operating guidelines on page 402. When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 9
Solid Carbide - 10

0° LEAD, 45° HELIX, 4 FLUTE CENTER CUTTING, 5 & 6 FLUTE NON-CENTER CUTTING Cutter # Nominal Cutting Edge Thread Extension C Ramp Number Effective Diameter Length Size Length Corner Angle Operating guidelines on page 402. When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 10
Solid Carbide - 11

SOLID CARBIDE END MILL TIP - 46J, 46D 0 LEAD, 45 HELIX, HIGH PRECISION, CENTER CUTTING Cutter Number SHARP R .031 SHARP R .015 R .031 R .062 SHARP R .015 R .031 R .062 Operating guidelines on page 402. When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 11
Solid Carbide - 12

0 LEAD, 38 HELIX, CENTER CUTTING SOLID CARBIDE END MILL TIP- VARIABLE PITCH - 47J, 47D, 47C II Operating guidelines on page 402. When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 12
Solid Carbide - 13

SOLID CARBIDE END MILL TIP - 47J, 47D 0 LEAD, 45 HELIX, HIGH PRECISION, CENTER CUTTING SHARP R .015 R .031 R .062 SHARP R .015 R .031 R .062 SHARP R .015 R .031 R .062 SHARP R .031 R .062 R .031 R .062 ORDER THIS PAK NUMBER Straight Shank When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 13
Solid Carbide - 14

0˚ LEAD, 45˚ HELIX, CENTER CUTTING Sho ulder Cutter Number Operating guidelines on page 402. Optional Torque Wrench When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 14
Solid Carbide - 15

SOLID CARBIDE FINISHING END MILL TIP - 48D, 48J, 49D, 49J 0 LEAD, 45 HELIX, NOT CENTER CUTTING Cutter Number L1 Cuttinq Edqe Length SHARP R .031 SHARP R .015 R .031 R .062 SHARP R .015 R .031 R .062 SHARP R .031 R .062 R .031 R .062 R .125 R .125 When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 15
Solid Carbide - 16

0 LEAD, 45 HELIX, CENTER CUTTING, POLISHED, SHARP Cutter Number L1 Cuttinq Edqe Length Operating guidelines on page 402. When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 16
Solid Carbide - 17

Cutter Number *Drill depth not to exceed 2/3 edge length. Operating guidelines on page 402. ORDER THIS Straight End Mill End Mill Shank Length Projection Assem. PAK NUMBER (QTY) End Mill Tip Shank Dia. Corner Adaption of Cut Length Length Wrench Thread Size Wrench Optional Torque Wrench When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 17
Solid Carbide - 18

*If used for spot facing, drilling or boring, drill depth not to exceed 2/3 edge length. Operating guidelines on page 402. CHIPSURFER PAKS When assembling, be sure carbide tip is seated firmly on shank with no gap. Note: DO NOT apply lubricant to the thread connection. Wrench not included with carbide tip or shank purchase.

Open the catalog to page 18

All Ingersoll Cutting Tools catalogs and technical brochures

  1. Slotters

    16 Pages

  2. END MILLS

    58 Pages

  3. HI-POS+

    45 Pages

  4. quadtwist

    11 Pages

  5. GOLD RUSH

    12 Pages

  6. gold max 4

    3 Pages

  7. Plunge Cutters

    20 Pages

  8. Turning Section

    160 Pages

  9. Fine Gold

    302 Pages

  10. Gold-Rush Catalog

    1440 Pages

  11. Image Brochure

    13 Pages

  12. BTA DRILLS

    110 Pages

  13. Power-Feed+

    6 Pages

  14. Finish-Ball

    6 Pages

Archived catalogs

  1. Milling Catalog

    430 Pages

  2. Face Mills

    69 Pages

  3. End Mills

    123 Pages