In the year 2000, Ingersoll Cutting Tool Company came to realize that in order to better serve our customers in the demanding world of metal removal, it was time to expand our horizons and become a full line supplier to the metal working industry. To that end Ingersoll introduced a line of inovative, technologically superior drills and rolled out it’s first ever comprehensive “Hole Making” catalog. Now five years later, due in a large part to the popularity of both the Qwik-Twist and Quad-Drill+ lines of drilling products, the “BOREline” is the fastest growing division at Ingersoll Cutting Tools....

Diameter Range Cutting Depth Indexable Spotting Drill Indexable Spotting Drill Pak Replaceable Point Drills Solid Carbide Drills Replaceable Point Drills 3:1 Replaceable Point Drills 5:1 Replaceable Point Drills 8:1 Chamfer Shanks

Series Page Square Insert Indexable Drills 2:1 Square Insert Indexable Drills 3:1 Square Insert Solid Carbide Drills 2:1, 3:1 Eccentric Adjustment Bushing BU Center Cut Counter Bore Tools i°ua Indexable Counter Bore Tools

■ SSaiW INDEXABLE SPOTTING DRILL-series w Diameters Nominal Included Angles Insert Corner Included Dia. of Spot Drill Maximum Angle inch mm Number Depth of Cut Extension from Holder ■ INDEXABLE SPOTTING DRILL PACKAGES- SERIES "FAK" C§3 © Spot Drilling Counter Sinking Engraving Save Package up to 15% when purchasing r tnnlina Dackages Spotting drills with indexable strength and convenience Tooling Package Includes: • One indexable spotting drill • One Torx® screw driver • Three additional insert screws • Durable polypropylene case

.010 R for fine engraving line width Engrave part numbers, serial numbers, lot numbers, company logos, etc. all in the same machine set-up. Utilize the CNC control capability to program the engraving. High speed engraving capability up to 100 inches/minute. Item No.- 5110040 Insert Part No.- TFLT15T303N Grade- IN1530 (Tough wear resistant grade,well suited for engraving) *For insert grade descriptions, see page 86. **.010 insert radii for engraving For technical information, see pages 91 and 92.

rn^^nmo- replaceable point spotting drills - series -y- Diameters Nominal Included Angles Max. Dia. of Spot:

*For insert grade descriptions, see page 86. For technical information, see pages 91,92 and 93.

SOLID CARBIDE DRILLS- series Diameters L:D Ratio Geometry 3,00mm to 12,00mm 5:1 140° included point angle 30° axial rake angle Metric Standard-(dimensions in mm unless noted)

For technical information, see page 93.

REPLACEABLE POINT DRILLS - series -r Diameters Length to Diameter Ratio .2953" to 1.0197" 3:1 Pocket Clamping Size Key Do not mount a smaller drill point than the D1 range listed for each drill body. * Drill bodies for coolant through the point. Metric shanks available as non-stock standards. See pages 25-29 for replaceable drill points. For technical information, see pages 95-99.

Length to Diameter Ratio 5:1 Pocket Clamping Size Key Optional Chamfer Do not mount a smaller drill point than the D1 range listed for each drill body. * Drill bodies for coolant through the point. Metric shanks available as non-stock standards. See pages 25-29 for replaceable drill points. For technical information, see pages 95-99.

REPLACEABLE POINT DRILLS - series -y- Diameters .3937" to 1.0197" Length to Diameter Ratio D1 Do not mount a smaller drill point than the D1 range listed for each drill body. * Drill bodies for coolant through the point. Metric shanks available as non-stock standards. See pages 25-29 for replaceable drill points. For technical information, see pages 95-99.

SLIP FIT DRILLS- series -rDiameters .2953-.8228" Length to Diameter Ratio 3.5:1 Nom- Dia Part Number DOC Ext Overall Shank Dia Size Key Do not mount a smaller drill point than the D1 range listed for each drill body. See pages 25-29 for replaceable drill points. For technical information, see page 102.

The number of drill point indexes is dependent on machine rigidity, workpiece stability and clamping, machining parameters, workpiece configuration, material coolant, coolant pressure and proper drill application. It is recommended to use the torque key for inspection purposes only, not as a substitute for the standard key provided with each drill body. Torque keys are available for checking minimal clamping torque. If a "click" is not heard or felt while slowly unclamping with the torque key, the drill must be replaced

SLIP FIT CHAMFER SHANKS - series -mhk- Hole Diameters Shanks .2953" - .8228" Adjustable depth drilling and chamfering combination tools Nom. Dia. Slip Fit Drills Adjustment Chamfer Shank Insert Ext. OAL Inse Inch mm Part No. Min1 Max2 Part Number Dia Dia Series 1- Minimum adjustment is with the smallest drill point diameter in the range For chamfer inserts see page 23. 2- Minimum adjustment is with the largest drill point diameter in the range For replaceable points see page 25-29. *Straight shank with whistle notch flat For technical information, see page102. Drill Range Side Lock Screw Rear...

■ TAP DRILL/CHAMFER COMBO - series -y- Tap Drills M8-M24 Combine tap drilling and chamfering in one operation. D1 Thread Nom Nom Size Point Point Size Size Inch mm L1 L2 General D1 Full Full Purpose Point Dia to Dia to Drill Point Range Chamfer Top of OAL Shank Shank Chamfer Pocket Clamping Dia Dia Dia Size Key mm Thread Nom Nom Size Point Point Size Size Inch mm Body Number General Purpose Drill Point L1 L2 L3 L4 D3 Full Full Ext OAL Shank Shank Chamfer Pocket Clamping For chamfer inserts see page 23. For replaceable points see page 25-29. For technical information, see page 102. HARDWARE Chamfering...

CHAMFER SHANK INSERTS Grade* Insert Number Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose * For insert grade descriptions, see page 86. TAP DRILL/CHAMFER COMBO DRILL INSERTS Grade* Insert Number * For insert grade descriptions, see page 86