Product Overview
16Pages

Ingenieurbüro M.ZippererGmbH From marketing knowledge to real innovation Ingenieurbüro M. Zipperer GmbH Etzenbach 16 D 79219 Staufen Telefon 076 36 /78 03-0 Telefax 076 36 /78 03-45 info@cat-ing.de · www.cat-ing.de

Ingenieurburo CAT | Stirring Motors Overhead Stirring Motors CAT R100CT Stirring Motors Unit Description R 100CT The „bull“ of Ingenieurburo CAT high torque stirring motors applies up to 600 Ncm torque at speeds of 10-500 rpm. Ideal for medium to high viscous media, 10,5 mm chuck, hollow shaft, p-controller and alpha-numeric display of mechanic power, torque and timer, RS 232. R 100C Powerful stirring motor 150 Ncm for laboratory and pilot-plant use, 10.5 mm chuck with hollow shaft, microprocessor, speed controlled and torque display, timer, RS 232. R 100CL Same as R 100C but with 250 Ncm...

Ingenieurburo CAT | Stirring Motors and Paddles Length Diameter Diameter Part No. Blade Stirrer including blade of rod of blade Length Diameter Diameter Part No. Propeller Stirrer including blade of rod of blade Part No. 60618-50 Stirring blade + shaft p c 60619-00 Stirring blade ^ 60617-50 Dissolver + shaft 60617-00 Dissolver 0 100 60618-00 Dissolver shaft 0 8x350 60494-00 U-Stand 60495-00 Special clamp for R 100 60709-00 Software for Windows PC-connecting cable 60491-00 Pedestal Stand 60492-50 Cross Over Clamp Steel details are subject to change without prior notice.

Homoaenizers Homogenizers/Motors (Drive units) Unit X 1740 Unidrive X 1000 Unidrive X 1000D X 360 P 1500 X 120 Description High-power, heavy-duty drive motor with electronic speed control, 1500 watts for 40 mm tools Powerful drive motor, built-in speed control for all dispersing tools below up to 30 mm Same as above but with digital speed display Drive motor, 360 watts, high speed motor, speed control separateley available Speed control unit for X 360 Hand-held, high speed drive motor for small volumes electronically stabilized Speed control for tools up to 17 mm Homogenizer/Dispersing...

Teeth per rotor/ stator * T denotes Teflon bearing, G denotes ceramic seals ** Special knife generator for stringy and fibrous materials Tools Description DK 30 Stainless steel, flow through chamber for shaft G 20 and G 30, flow 3000 Itr/h 60428-00 DK 40 Stainless steel, flow through chamber incl. motor and G 40, flow 5000 ltr/h 60429-00 AX 60 Analytical mill (use drive unit X 520 or Unidrive) stainless steel grinding chamber with separate cooling channels 60409-00 All tools are available for coarse, medium and fine grade and with special cutting knifes. Please...

Ingenieurbiiro CAT | Magnetic Stirrers Hotplate; Stirrers and 23 MCS 67 KM 16 M 26 Hotplate Magnetic Stirrers Description Microprocessor controlled, LCD display, programmable multistep timer, safety temp., temp. ramps, RS 232, Eloxal hotplate, membrane keyboard, PT100 sensor Same as above but with Ceran® hotplate Microprocessor controlled, alpha-numeric LCD-display, Ceran hotplate, square 210 x 210 mm, halogen heating, connector for PT100 sensor, programmable timer and safety temp., RS 232 via adapter possible Watts Rpm Temp Microprocessor controlled, alpha-numeric LCD display, Eloxal...

Ingenieurbiiro CAT | Magnetic Stirrers Magnetic Stirrers (with stainless steel cases) Unit Description M 30.30 Electronic feed-back speed control, volumes up to 100 liters M 20.20 Electronic feed-back speed control, volumes up to 50 liters M 15 Opto-electronic speed control M 5 Stirrer with electronic feed-back speed control ECM 5 Compact low-energy stirrer, electronic speed control ECM 2 Compact stirrer for cell treatment, low speed range M 2 Small lightweight stirrer, fixed speed, pp - housing Accessories for MCS 66, MCS 67, M 26, M 16.5, M 16.6 and M 17.5 PT100...

Ingenieurburo CAT | Magnetic Stirrers Hotplates and Heaters(usual temperature range: 40 - 300°C thermostat controlled) H 17.5D Microprocessor controlled, 4 digit temp., speed and time LED display, Ceran® hotplate, 135 x 135 mm connector for PT-100 probe, RT to 500°C H 3 Ceran® hotplate 135x135 mm H 3.1 Stainless steel hotplate 0130 mm dia H 4 Sandbath for sand, oil or other fluids, 1 ltr st. steel bath H 30D Microprocessor controlled, 4 digit temp., and time display, RS 232-via adapter possible, temp.- control via Pt-100, safety features, aluminium hotplate, RT to 380°C H 30/30...

SH 10 with ”Deep Well“ adapter Shaking Heaters Description Shaking heater for 4 microtiter plates, high precision temp. control from RT to 95°C in steps of 0.1°C Programmable over-temperature-cut-out. Optical control via a 2 x 16 character alpha-numeric LCD. Protection against unintended changes on set temperature, safety-temperature, switch-off timer, RS 232 and special indexing mechanismn which stops platform always at defined position. µP controlled thermo shaker for 48 Eppendorf tubes of 1.5ml content, RT to 95°C, 3mm orbit. µP controlled thermo shaker for 48 Eppendorf tubes of 2.2ml...

Ingenieurburo CAT | Shakers and Mixers S20-V VM 2 VM 3 S 20 with various shaking attachments S20-S Shakers Unit Description Frequency S 25 Powerful shaker with linear reciproce shaking motion, RS 232 interface for computer control, indexing mechanism, timer, 20mm amplitude. To be combined with various shaking adaptors 40-200 S 26 Powerful shaker with horizontal shaking motion, RS 232 interface for computer control, indexing mechanism, timer, 3mm amplitude. To be combined with various shaking adaptors 60-1100 S 50 Wrist-action shaker for up to 8 Erlenmeyer flasks of 500 ml each,...

Ingenieurbiiro CAT | Shakers and Mixers Accesories for Shaker S 25 and S 26 Shaking Adaptor for Erlenmeyer flasks, 6 flasks a 250 ml, 4 flasks a 500 ml Shaking Adaptor for max. 4 separating funnels Clamps for Erlenmeyer flasks: 25 ml, 50 ml, 100 ml, 250 ml, 500 ml Accesories for Shaker ST 3 and GM 3 Detachable platform Horizontal Mixers Unit Description Watts Rpm Part No. 5 rollers synchronous rocking and rotating tube mixer Same as RM 5-40, but shorter rollers Same as RM 5-40, but slow speed Same as RM 5-40, but variable slow speed Same as RM 5-40, but variable high speed RM 5W-40...