Ingenious engineering. Ingenia GmbH Mail [email protected] MASSGESCHNEIDERTE MASCHINEN FUR THERM0PLAST ISCHE MATER I A LI EN & HALBZEUGE

Semi-Automatic Bending Machine Model A-BW INGENIA bending machines, model A-BW, are robust all-round machines from lower to upper range of application. The bending cycle is running automatically, the main bending parameters are stored in a database which is linked to the plc-control. The smallest model shows 2m working width (model 20.15 A-BW), the largest available machine has a working width of 4 m (model 40.15 A-BW), the maximum bendable thickness is 15 mm (20/25mm). The machines are designed to fold-weld all semi cristalline thermoplastics as PE, PP and PVDF as well as to brilliantly bend...

View onto the upper heating element of an INGENIA 30.15 A-BW Spare parts: All used parts integrated in pneumatic ore plc system are available of the shelf by FESTO resp. SIEMENS

Technical data of standard machine, model xx.15 A-BW: 20.15 A-BW 30.15 A-BW 40.15 A-BW max. dimensions Length: 3200 mm 4200 mm 5200 mm Width (without extension arms): 930 mm 930 mm 930 mm Height of table level: 1100 mm 1100 mm 1100 mm Weight: app. 1,4 to app. 1,8 to app. 2,1 to. Max. working width: 2050 mm 3050 mm 4050 mm Bendable sheet thickness: 3-15 mm 3-15 mm 4-15 mm Min. cross-section, square pipe: 220x295 mm 220x295 mm 220x295mm Min. bending angle: 10° 10° 10° Max. Bending angle: 95° 95° 95° Range of application ernergie supply Electrical: 230/400 V 3/N/PE 50 - 60 Hz Required electr. Performance:...

Base Machine: fixed control panel, opposite of opening side 2 digital temperature regulators for separated control of upper and lower heater temperature Digital timer for heating cooling time setup Manual pressure valves for setup of melting and bending forces Manual setup / correction of bending line Safety lines or safety stops alongside of the machine for possible emergency case Switch to choose automatic ore step- bending cycle Possibility to interrupt or extend actual program step Clamping beam with quick releasing bolt, to take out bended pipes Two clamping areas, for separated clamping...