Ingenious engineering. Ingenia GmbH Mail [email protected] MASSGESCHNEIDERTE MASCHINEN FUR T H E R M 0 P LAST I S C H E M AT E R IA LI E N & HALBZEUGE

Manual Bending Machine Model BH INGENIA bending machinery, model BH, are robust all-round machines with a flexible range of application. The smallest model shows 1m working width (model 10.xx BH), the largest available machine has a working width of 2 m (model 20.xx BH), the maximum bendable thickness is 10 mm. The machinery is designed to fold-weld all semi cristalline thermoplastics as PE, PP and PVDF as well as to brilliantly bend amorphous thermoplastics as PVC, PMMA (acrylics), PET and PS Structure of the machine: The main frame is designed as a solid rectangular- hollow- steel profile construction....

Standard Machine: Fixed control panel, opposite of opening side Separated temperature control for upper and lower heating element Digital temperature read out Timer to adjust heating time One lower dark wave single line heating element Tmax = 4000C Lower heating element height adjustable to influence width of heated area Adjustment for width of lower heating area Heating table and bending table are separated to allow simultaneous heating and cooling Quick connector system for fast exchange of lower heating element Machine is prepared to preinstall an upper heater with electrical drive at any...

Technical data of standard machine, model xx.10 BH: Unit 10.10 BH 15.10 BH 20.10 BH Length mm 1800 2300 2800 Width heating table mm 1100 1100 1100 Width bending table mm 1200 1200 1200 Hight/ hight of table mm 1200/900 1200/900 1200/900 to 0,4 0,6 0,8 Max. working width mm 1050 1550 2050 Bendable thickness mm 2- 10 2- 10 2- 10 Min. length of bended side mm see recommend Min. channel dimensions mm 70 x 100 70 x 100 70 x 100 Min./ max. bend angle mm 10°-120° 10°-120° 10°-120° 1 1 1 230/400 V 3/N/PE 50-60 Hz 2,3 Main dimension weight Range of application Clamping areas of sheet producer Energie...