B02. technical data, S easy butt welding machine, March 2013
4Pages

{{requestButtons}}

Catalog excerpts

B02. technical data, S easy butt welding machine, March 2013 - 1

Ingenious engineering. Ingenia GmbH Mail info@ingenia-gmbh.de MASSGESCHNEIDERTE MASCHINEN FUR T H E R M 0 P LAST I S C H E M AT E R IA LI E N & HALBZEUGE

Open the catalog to page 1
B02. technical data, S easy butt welding machine, March 2013 - 2

Butt welding machinery S easy INGENIA butt-welding machinery, model S easy, are flexible all-round machines from lower to medium of application. The welding cycle is running automatically operated by a PLC. The smallest model shows 1 m working width (model 10.xx S easy), the largest available machine has a working width of 4 m (model 40.xx S easy); the maximum weldable thickness is 15 (20 mm). The machines are designed to weld all standard thermoplastics as PE, PP, PVC- U and PVDF. INGENIA machines are designed according the requirements established by DVS e. V. (German Association for...

Open the catalog to page 2
B02. technical data, S easy butt welding machine, March 2013 - 3

Technical Data of standard machine, Model range xx.15 S easy: unit 10.15 S easy 15.15 S easy 20.15 S easy 30.15 S easy Main dimensions Length mm 2000 2600 3000 4000 Width mm 1000 1000 1000 1000 Height/ height of table mm 1200/850 1200/850 1200/850 1200/850 to 1 1,2 1,4 1,6 Maximum working width mm 1050 1550 2050 3050 Weldable thickness mm 2-15 (20)* 2-15 (20) 2-15 (20)* 2-15 (20)* 27 27 27 27 Machinery weight Working range Gap between beam and table mm Minimum square pipe mm 210 x 250 210 x 250 210 x 250 230 x 290 Minimum cylindrical pipe mm 500 500 500 500 1 1 1 1 4 6 Clamping range per...

Open the catalog to page 3
B02. technical data, S easy butt welding machine, March 2013 - 4

Basic equipment of the machinery: Fixed control panel, opposite of opening side Integrated Moeller Easy PLC Temperature setup via display Temperature control integrated in start process of weld cycle. If temperature is out of tolerated temperature range the machine will not release start. Possibility to interrupt or extend actual program step Clamping beam with quick releasing bolts to take out welded pipes Couple mounted clamping plates, non-rotating, with anti-skid covering Heating element with Teflon- coating 25 x 50 mm, Tmax = 2600C Integrated alignment beam made of stainless steel...

Open the catalog to page 4

All INGENIA GmbH catalogs and technical brochures