ICB Series All-in-One Liquid-Cooled Energy Storage Solution 218kW/218kWh (1P/1 Hour), 120kW/241kWh (0.5P/2 Hours) Liquid-Cooled Chiller Battery Alarm Indicator and Beeper Aerosol Fire Extinguisher Inner LCD EMS Controller EPO Dehumidifier Battery Pack Perfluorohexanone Firefighting Battery Control Box BiDi ACDC MPPT DCDC External Water Fire Interface Introduction The ICB series all-in-one liquid-cooled energy storage system is specifically designed for commercial and industrial energy storage as well as EV charging energy storage applications. It offers two configurations: one with a rated power of 218kW and a capacity of 218kWh, with optional 30kW PV input; the other with a rated power of 120kW and a capacity of 241kWh, with optional 30kW/60kW PV input. It supports both standalone operation and multi-unit parallel expansion, allowing flexible adaptation to different capacity requirements. It complies with IP55 protection rating for outdoor use, ensuring safe installation and reliable operation in outdoor environments. Main Features PCS maximum efficiency ≥98.7% Robust 5-level comprehensive fire protection 1P capability to enhance CPO operation efficiency Building-block design for hassle-free future installation Multi-dimensional large-surface liquid cooling, ≤3°C battery cell temperature difference Optional STS cabinet ensures 20ms instant backup power supply to loads when off grid Flexible expansion to meet CPO's phased operational requirements Anti-reverse protection through coordination between gateway AC meter and EMS Energy Expansion AC/STS Cabinet On grid Max 5 sets in parallel + AC cabinet Up to 1.09MWh (1P) or 1.2MWh (0.5P) Off grid Max 2 sets in parallel + STS cabinet, up to 436kWh (1P) or Max 4 sets in parallel + STS cabinet, up to 964kWh (0.5P) N (N=1~5) MQTT/WEBSOCKET-JASON, MODBUS/TCP IEC61850/IEC104 Peak Shaving Demand Control Dynamic Power Expansion Cost Saving Reactive Power Compensation Load Status Grid Status 2S: UNE 217001:2020 3S: VDE4105 1.5S: INFY SOLUTION Anti Overload Anti Reflux BES Node 1# EMS Implement BES Node 2# Load Calendar Dis/Charge Time Dis/Charge Parameters DIN70121 Battery SOC/SOH/ Power Limit System Status Off Grid/ Backup Power Smart Charge Load Management Peak Valley Price

Technical Parameters Model Operating Relative humidity <95%RH, non-condensing Cooling method PCS: intelligent air cooling; battery pack: liquid cooling Protection rating IP67 for battery pack, IP55 for cabinet Power factor >0.99 (pure active power mode); -1~+1 adjustable (passive/active power mode) Battery dis/charging power ratio 1P/1 Hour |0.85P/1 Hour 0.5P/2 Hours |0.5P/2 Hours Number of battery clusters 1 BMS Infypower 2-level BMS structure: battery pack BSU + high voltage control box BMU STS power switching time Bypass/off-grid function On-grid/off-grid control with automatic/manual mode,...