- Catalogs
- Infranor Group
- AN_USB_RS232_adapter_en_1.1
AN_USB_RS232_adapter_en_1.1
1 /1Page
AN_USB_RS232_adapter_en_1.1
1 /1Page
Catalog excerpts
Application note March 10, 2010 Recommendations when using a USB / Serial adapter 1/ General description The progressive dying-out of serial ports on the new PCs will involve the mandatory use of USB/Serial adapters for using the parameterization softwares with our drives. The operation principle of these adapters consists in creating virtual COM ports (1 to 16) on the PC. The Gem Drive Studio software takes into consideration only the COM1 to COM8 ports up to version V2.5. The following versions allow to deal with serial ports up to COM16. For the Gem Drive Studio versions below 2.5, if the USB/Serial adapter driver creates a virtual COM port with number higher than 8, this number can be modified: - From the PC peripheral manager accessible in the control, select the virtual COM port and modify its number in the advanced parameters of the Properties window. 2/ Selection of an adapter Plenty of adapters are available on the market, but they do no all offer the same warranties as for the performances and the sensitiveness to electromagnetic disturbances. When purchasing an adapter, it is highly recommended to choose an industrial adapter than a consumer one. Its cables must also be mandatorily shielded. For example, the USB-COM-M adapter developed by company VSCOM answers the performance and reliability requirements. The distributors of this product are listed at following link: w
Open the catalog to page 1All Infranor Group catalogs and technical brochures
XtrapulsPac_EN4 Pages
XtrapulsGemTemplates_e_1.421 Pages
XtrapulsGem_User_Manual_v1.2.0.64199 Pages
XtrapulsGem_Inst_e_2.142 Pages
XtrapulsGem_Inst_e_2.042 Pages
STO_declaration_Gem2 Pages
SMTBSi-2Tz_en_2.143 Pages
![SMT100D_e_1.01[1]](https://img.directindustry.com/pdf/repository_di/4620720/smt100d-e-101-1-1141223_1mg.jpg)
SMT100D_e_1.01[1]40 Pages
smt-10032 Pages
PacSimBox_e1 Page
PacSimBox_d_11 Page
Pac-SF01_flyer_en_18.024 Pages
Pac_User_1.2.1.218253 Pages
Pac_Templates_en_1.927 Pages
Pac_STO_Installation_en_2.213 Pages
Pac_SF01_operating_en_1.663 Pages
Pac_SF01_EN4 Pages
Pac_Installation_en_2.2382 Pages
Pac_GDPS_CEconformity1 Page
Pac_flyer_en_17.124 Pages
Pac_EC_conformity_25.041 Page
Option_CT_EMF6 Pages
MOVINOR_LH055_LH086_LH097_LH14223 Pages
ma_series6 Pages
GemSafeTorqueOff_en_1.112 Pages
GemProgramming_e_1.147 Pages
GDPS_old_version_1.1_111 Pages
CE_conformity_Gem1 Page
CD1pm_e_1.2(old)18 Pages
CD1pInst_e_7.2(old)35 Pages
CD1kInst_e_4.1(old)40 Pages
CD1k_CANopenProtocol_e_1.3(old)86 Pages
CD1a_e_7.1(old)45 Pages
Catalogue gamme SMT-BD111 Pages
BM20A(F)v3_020 Pages
BM20A(D)v3_020 Pages
BF400(GB)v2_221 Pages
BF400(D)v2_221 Pages
BF230(GB)v2_023 Pages
BF230(F)v2_023 Pages
BD2m_e_2.269 Pages
BD2m(GB)2.070 Pages
BD2_e_3.253 Pages
BD2(GB)3.153 Pages
BD2(D)3.154 Pages
Movinor_LH_e4 Pages
ma_series6 Pages
BD1t(GB)3.181 Pages
BD1t(F)3.085 Pages
BD1pInst(GB)3.025 Pages
BD1pInst(F)3.023 Pages
BD1pInst(D)3.024 Pages
BD1pCD1pUse_e_2.457 Pages
BD1m(GB)5.058 Pages
BD1m(F)5.057 Pages
BD1m(D)v3_364 Pages
BD1k(GB)2.135 Pages
BD1k(F)2.136 Pages
BD1j(GB)v2_4119 Pages
BD1j(F)v2_421 Pages
BD1i(GB)v2_2123 Pages
BD1i(F)v2_227 Pages
BD1h(F)3.065 Pages
BD1h(D)3.059 Pages
BD1g(GB)v3_028 Pages
BD1g(F)v3_028 Pages
BD1f(GB)v2_0118 Pages
BD1f(F)v2_0117 Pages
BD1e(F)v2_0122 Pages
BD1d(GB)v2_0125 Pages
BD1d(F)v2_0125 Pages
BD1c(GB)v2_0119 Pages
BD1c(F)v2_0119 Pages
BD1a400(GB)v2_343 Pages
BD1a400(F)v2_344 Pages
BD1a400(D)v2_345 Pages
BD1(GB)7.1_noPW45 Pages
BD1(GB)7.145 Pages
BD1(F)7.1_noPW47 Pages
BD1(F)7.147 Pages
BD1(D)7.145 Pages
BD1 Katalog11 Pages
08ma_ms_e_0170020 Pages
Easy_User_5.0.1.60.2190 Pages
08ma_mrm_em_0157520 Pages
01ma_smv_e_0195340 Pages
VDSetup_Manual_en_1.669 Pages
PacHP-SF_Flyer_en_23.064 Pages
IRD_User_Manual_en_1.2.XX.54.rev_b216 Pages
PacHP_User_en_1.2.8.100.b280 Pages
PacHP_TÜV_certificate_25.072 Pages
PacHP_SF02_operating_en_1.6103 Pages
PacHP_SF01_operating_en_2.063 Pages
PacHP_Installation_en_2.991 Pages
PacHP_Series_Brochure8 Pages
PacHP_Flyer_us_20.104 Pages
IRD_Installation_en_1.542 Pages
IRD_EC_Conformity_25.031 Page
GDPS_Installation_en_4.418 Pages
EtherCAT Interface_en_1.320 Pages
GDPS_EC_conformity_24.071 Page
Easy_STO_en_1.414 Pages
Easy_EC_Conformity_24_101 Page
Easy_DB_STO_en_1.214 Pages
Easy_DB_Installation_en_1.436 Pages
CD1pmUser_en_4.255 Pages
CD1pmInst_en_8.1540 Pages
CD1k_CANopenProtocol_en_2.10.1.1108 Pages
CD1pm_ProfibusProtocol_en_1.550 Pages
CD1kUser_en_2.326 Pages
CD1a_en_8.1762 Pages
CD1kInst_en_5.1646 Pages
CD1_STO_en_1.816 Pages
CD1_STO_conformity_19.022 Pages
CD1_flyer_en_14.094 Pages
CD1_EC_conformity_24.051 Page
Braking_Resistors_en_1.510 Pages
AN_DC_bus_interfacing_en_1.35 Pages
AN_CD1pm_SinCosTracks_e_1.07 Pages
AN_CD1pm_AbsoluteEncoder_en_2.010 Pages
AN_CD1ak_SinCosTracks_e_1.07 Pages
AN_CD1ak_AbsoluteEncoder_en_2.010 Pages
XtracontrolDC2_EN4 Pages
Flyer_VisiTouchCNC_EN_V1.1-12 Pages
XtraforsWashdown_EN-20242 Pages
DataSheet_CybIO_CNC_V1.06 Pages
XtraforsPrime_EN-20242 Pages
XtraforsMSS_EN4 Pages
XtraforsMSA_EN_20242 Pages
XtraforsEx_EN-20242 Pages
XtraforsBR_EN-20242 Pages
XtraforsBL_EN-20242 Pages
XtraforsBC-ed01-vs34 Pages
Manual_XtraforsPrime46 Pages
Drawing_11 Page
Datasheet_MSS5 Pages
Datasheet_22 Pages
Datasheet_14 Pages
BLSBLT_series2 Pages
BL2202212 Pages
BL2702 Pages
BL1902 Pages
bl100_series6 Pages
bl40_series6 Pages
BL302 Pages
2019-01_XtraforsFP-DSL_FR4 Pages
Movinor_T_EN4 Pages
Movinor_N_EN4 Pages
Movinor_Low_Voltage_EN4 Pages
Manual Movinor T 03-202646 Pages
Manual Movinor N 03-202663 Pages
XtrapulsEasy™ AC servo-drive4 Pages
XtrapulsCD1 AC servo-drives4 Pages
CybIO6 Pages
AC SERVOMOTORS2 Pages
Movinor® N AC Servomotors4 Pages
