40 years designing, developing and manufacturing industrial doors for all types of industry. Tailor-made doors adapted to each of our customers. Since 1980 we have been upgrading our products through experience, investigation and the application of the latest technologies. We have also grown and developed in the international market being able to give our service in 5 continents through our factories, subsidiaries and commercial offices. Today, with 40 years of history, Infraca is one of the most important companies in the manufacture of quality industrial doors, as well as an international reference....

Contents General Information COLD ROOM DOORS Sliding Doors Commercial 002 Industrial IF Automatism Vertical (Guillotine) IFire EI2-60 Hinged Doors Commercial Industrial Ifire EI2-90 Fixed / Sliding Strip Curtains Temperature control system HTCP Control Box IF10VF SERVICE DOORS Hinged Doors Service Door Clean Roon Door Fire Rated Door Exhibitor Window Flip-Flap Doors Sliding Doors Sliding Service Door - Manual Sliding Service Door - Automated HIGH SPEED DOORS Roll-up Doors Industrial - PRE Autofix - PRX Clean Room Door Cold Room Door Fold-up Door DOORS FOR SPECIAL APPLICATIONS ULO Door The data...

GENERAL INFORMATION Information about measurements OPENING WIDTH (mm) x OPENING HEIGHT (mm) • One of the most important measurements for the installer is the size of the cut out in the panel / structural opening, which is always specified in terms of the measurements of the free passage of the door plus an extra margin (in mm). • This margin corresponds to the space needed to install the frame, after which a filler can be injected into the remaining gap. Wall opening length = ANH + X Wall opening height = AH + X • Door sizes are defined by the dimensions of the free passage with the door open,...

Frame and installation types Product packaging Panel-mounted frame: ▪▪ Consists of a main frame in combination with a secondary frame (referred to as the counter frame). This combination is adjusted to the thickness of the panel into which the door is to be installed. ▪▪ If the panel is thicker than the standard counter frame combination, a third frame (supplementary frame) is used. ▪▪ The frames are joined to each other by screws, which remain hidden beneath the counter frame beading. Wall frame: ▪▪ Consists of a main frame to which several construction clamps are attached, arranged in such...

Cold Room Doors Cold Room Doors Product Catalog

Standard features Cold Room Doors COMMERCIAL SLIDING DOOR 002 ▪▪ New guiding system with 3 axes of adjustment for greater precision. (threaded in height and depth) ▪▪ Guide cover included Sealing system Closing system detail ▪▪ Hermetic seal with 45º drop, made from extruded aluminium; allows manual opening with minimum effort. ▪▪ Internal and external handles, all screws made from stainless steel and anodised aluminium, designed and manufactured by Infraca. Frame ▪▪ Constructed from L-section extruded aluminium with thermal break, 20 micron anodising treatment or white lacquered finish. ▪▪ Doors...

Cold Room Doors Standard features INDUSTRIAL SLIDING DOOR IF Sealing system ▪▪ Hermetic seal with 45º drop, made from and extruded aluminium; allows manual opening with minimum effort. ▪▪ Internal and external handles and all screws made from stainless steel and anodised aluminium, designed and manufactured by Infraca. Frame External handle ▪▪ Constructed from L-section extruded aluminium with thermal break, 20 micron anodising treatment or white lacquered finish. ▪▪ Doors finished in stainless steel come with the frame finished in anodised aluminium. The counter frames may be anodised as an...

Cold Room Doors Standard features Motor ▪▪ MHigh-quality, durable motor designed for industrial settings, manufactured and tested in accordance with the DIN EN 12453 standard for Industrial, Commercial and Garage Doors. DIN EN 12978 specifications and classification, in compliance with health and accident prevention regulations. ▪▪ Power: 0,37Kw. ▪▪ Speed: 0.6 m/s. ▪▪ Electronic limit sensors. ▪▪ Manual disengagement to facilitate manual operations. ▪▪ Maintenance-free. Hidden motor Infraca IF10VF control unit Application ▪▪ Industrial automatism used in sliding doors in preservation and freezing...

Cold Room Doors Standard features SLIDING VERTICAL DOOR GUILLOTINE Guide and sealing system ▪▪ Guide covers: Built in stainless stell 304, avoid the accumulation of dirt in the guide and significantly improve the appearance of the door. Frame Detail of third safety cable. Detalle tercer cable de seguridad ▪▪ Constructed from L-section extruded aluminium with thermal break, 20 micron anodising treatment or white lacquered finish. ▪▪ Doors finished in stainless steel come with the frame finished in anodised aluminium. The counter frames may be anodised as an option. ▪▪ Frames for panel chambers...

Cold Room Doors SLIDING DOOR IFIRE EI2-60 Standard features Frame ▪▪ Double structure frame, formed by joining cold room frame and “RF” frame. ▪▪ Cold room frame comprises L-section extruded aluminium with double thermal break and housing for heating element. ▪▪ “RF” frame consists of lacquered steel tube bonded to the cold room frame. Certification testing Application ▪▪ Fire resistant cold room door for +0ºC and -20ºC chambers, certified EI2-60 class B fire resistant. ▪▪ Installation in any industrial sector: agro-food, logistics, automotive, pharmaceutical... Detail image of guide and seal....

Cold Room Doors COMMERCIAL HINGED DOOR Standard features Fittings ▪▪ Grey-coloured composite, aluminium single point closure, with interior opening, vertical hinges which may be raised if not for a low-frame door. Seal 5520 Frame ▪▪ Constructed from extruded aluminium with 20 µm anodisation treatment or lacquered in white. ▪▪ Always fitted with access for forklifts unless a low frame is specified. ▪▪ Fitted with heating elements when used in freezing chambers. ▪▪ Doors finished in stainless steel come with the frame finished in anodised aluminium. ▪▪ Hinge-opening door for cold chambers used...