*mydirectindustry

LVDT-ISAL "KD"

Product catalog summary

Introduction
The document describes the LVDT-ISAL "KD" series displacement sensors, which operate on the principle of the differential transformer. These sensors feature a through-hole shaft and are available with displacement ranges from 2 mm to 200 mm. They have a protection degree of IP65 and a housing diameter of 20 mm.

Specifications

Electrical Specifications: The sensors have varying sensitivity and linearity deviation depending on the displacement range. They operate with an excitation voltage of 1 to 10 VRMS and an excitation frequency of 0.5 to 5 kHz. The input and output impedance values are specified for different displacement ranges.
Mechanical Specifications: The housing is made of nickel-plated steel, and the core is a nickel-iron alloy. The weight varies with the displacement range, and the sensors are rated for temperatures between -35°C and +120°C.
Environmental Conditions: The sensors have a degree of protection of IP65, with optional IP67 or IP68. They are resistant to impacts up to 200g and vibrations from 2 Hz to 2 kHz.

Options and Accessories

Various cable lengths and plug connections are available upon request.
Improved linearity tolerance and individual calibration services are offered.
Mechanical accessories include mounting blocks and flanges for 20 mm diameter sensors.
Electronic accessories include signal conditioners and circuit board modules.

Ordering Information
The order code includes the series, displacement range, connection type, and linearity deviation. Additional options can be specified upon request.

Contact Information
Inelta Sensorsysteme GmbH & Co. KG, located in Taufkirchen/Munich, Germany, provides contact details for further inquiries.

Catalog excerpts

inelta Sensorsysteme Serie LVDT-ISAL „KD" Induktiver Wegsensor durchgehender Geberstange / Displacement sensor with armature on both sites SAusgang Sensor: mV/V Output sensor: mV/V LVDT Wegsensoren arbeiten nach dem Prinzip des Differenti-altransformators. The displacement sensors operate according to the principle of the differential transformer. • Durchgangsbohrung / Kerndurchfuhrung • • Messweg von 2 mm bis 200 mm • Abmessungen / Dimensions With Throughholeshaft Displacement: 5mm up to 200mm Degree of protection IP65 Housing Diameter 20mm Standardtypen / Standard types

Open the catalog to page 1

inelta Sensorsysteme Serie LVDT-ISAL „KD"Induktiver Wegsensor durchgehender Geberstange / Displacement sensor with armature on both sites Optionen / Options • Andere Kabellange auf Anfrage (Standard = 1m) / Other cable lenght on request (standard = 1m) • Ausfuhrung mit Steckeranschluss (5-polig, Typ Binder) / Plug connection (5-pin, Type Binder) • Bessere Linearitatstoleranz (< 0,25%) / Improved linearity tolerance (< 0,25%) • Schutzart IP67, IP68 / Protection degree IP67, IP68 • Individuelle Kalibrierungen / Individual calibration service • Sensorsignalverstarker (intern, extern) / Signal conditioner...

Open the catalog to page 3

LVDT-ISAL "KD"

LVDT-ISAL "KD"

Catalog excerpts

All Inelta Sensorsysteme catalogs and technical brochures