Catalogs >
Inelme >
I-NPU

I-NPU
5Pages

Catalog excerpts

Open the catalog to page 1

Descriptions of the equipment The air pump system is a tool that allows to pump liquids taking into account their viscosity, density or with solid particles in suspension. Its operation is based on the fluid being driven from the alternating movement of its pneumatically driven double diaphragm. The pneumatic pump system consists of the following elements: Pneumatic Pump The pneumatic supply is via the rear mounted 8 mm pneumatic tube connector next to the pressure regulator Pneumatic agitator Designed for stirring and/or mixing different liquids. The ink bucket The commonly used bucket is...

Open the catalog to page 2

Magnetic Filter This element filters the ink by removing the solid particles found. It is equipped with a magnet attached to its own cover that retains small metal particles. The lid can be easily removed for maintenance. As it is mounted at the outlet of the pneumatic pump it also acts as an expansion vessel stabilizing the ink flow supplied by the pump. Pneumatic switch The equipment has a pneumatic switch to activate and deactivate the pump located at the front, to the left. In addition, the ink flow supplied by the pump can be regulated by the pressure regulator at the rear. Shuttle...

Open the catalog to page 3

MODEL OFFERED BY INELME Pneumatic feeding: - Air intake through a diameter tube of 8mm. - Pressure required up to 8 bar. - Estimated maximum consumption 300 l/min. MAXIMUM INK FLOW 50 l/min SET ACCORDING TO ATEX STANDARD (on request) Ink output ½” 360 micron filter mesh (as standard) | P.I. El Puig | Camí al Mar 18 | 46540 El Puig (Valencia – España) | tfn_ +34.96.1471085 | fax_ +34.96.1479009 | CIF ESB96560123 | inelme@inelme.com | | www.inelme.c

Open the catalog to page 4

Open the catalog to page 5

I-NPU 5Pages

Catalog excerpts

All Inelme catalogs and technical brochures

I-NPU
5Pages