I-LAC
5Pages

{{requestButtons}}

Catalog excerpts

I-LAC - 1

I-LAC ANILOX CYLINDER CLEANING BY LASER | P.I. El Puig | Camí al Mar 18 | 46540 El Puig (Valencia – España) | tfn_ +34.96.1471085 | fax_ +34.96.1479009 | | CIF ESB96560123 | inelme@inelme.com | | www.inelme.com

Open the catalog to page 1
I-LAC - 2

Descriptions of the equipment The system cleans the surface of cylinders and anilox very effectively using laser technology. The process is fast, simple, fully automatic and leaves the Anilox clean achieving the volume of the cells at 100% without the use of chemicals, bicarbonates, etc. So, the machine only needs power and does not generate any kind of waste. The cleaning is carried out with a special diode elements outside the engraved ceramic surface adhesives, waxes and silicones that may remain the cells. All this without altering or laser designed to remove such as dry ink residues,...

Open the catalog to page 2
I-LAC - 3

Operator interface The touch screen, in addition to the anilox configuration, also allows you to view the status of the machine at all times, time to end the cleaning cycle, list of current alarms or historical alarms, etc. The machine also has illuminated pushbuttons and an emergency stop for the easy, fast and correct operation of the unit. Laser The machine has a new laser with diode technology that reduces maintenance and extends the useful life of the machine. Extraction System The machine uses an extraction system that allows the capture of all particles in a reusable filter....

Open the catalog to page 3
I-LAC - 4

Washing process The washing process is fully automatic and consists of the following cleaning steps: - Preparation: The operator will report cylinder diameter and width Cleaning: The machine will automatically position the laser unit (using a servo motor) and start the cleaning cycle (laser firing with horizontal movement, rotational rotation and extractor fan) Completion: When the laser reaches the end of cleaning, it automatically returns to its starting position. At the end of the cycle, the operator must open the door and remove the anilox. Specifications Supply voltage...

Open the catalog to page 4
I-LAC - 5

I-LAC machines are available from a maximum length of 500 mm to 3500 mm (cylinder without shafts), covering any need, from the label sector to the case of special needs or large formats. I-LAC F60-15 Maximum cleaning length (shaftless cylinder): 1500 mm Minimum cylinder diameter: Ø100 mm Maximum cylinder diameter: Ø300 mm I-LAC F60-20 Maximum cleaning length (shaftless cylinder): 1500 mm Minimum cylinder diameter: Ø100 mm Maximum cylinder diameter: Ø300 mm | P.I. El Puig | Camí al Mar 18 | 46540 El Puig (Valencia – España) | tfn_ +34.96.1471085 | fax_ +34.96.1479009 | | CIF ESB96560123 |...

Open the catalog to page 5

All Inelme catalogs and technical brochures

  1. I-ADS

    3 Pages

  2. I-MIF

    1 Pages

  3. I-ASW-TT

    3 Pages

  4. I-CLC

    8 Pages

  5. I-DLS

    7 Pages

  6. I-NPU

    5 Pages

  7. I-AMX

    4 Pages

  8. I-DBC

    6 Pages

  9. I-AMX MCV

    7 Pages