I-LAC MULTI CLEAN VERTICAL CLEANING OF ANILOX SLEEVES BY LASER | P.I. El Puig | Camí al Mar 18 | 46540 El Puig (Valencia – España) | tfn_ +34.96.1471085 | fax_ +34.96.1479009 | | CIF ESB96560123 | [email protected] | | www.inelme.com

Description of the equipment I-LAC MULTI CLEAN is designed with two or three compartments, depending on the model, specifically for cleaning anilox sleeves. The key feature here is that while one compartment is in the process of cleaning one sleeve, the operator has the option to load another anilox sleeve into a separate compartment to start its cleaning. This optimizes the efficiency of the process by allowing multiple sequential cleaning tasks of anilox sleeves, reducing downtime, and increasing overall productivity. The system effectively cleans the surface of anilox sleeves using laser technology....

Operator Interface The touchscreen interface not only allows for the configuration of anilox sleeves but also provides real-time information about the machine's status, time remaining in the cleaning cycle, a list of current alarms or alarm history, and more. The machine is also equipped with illuminated buttons and an emergency stop for the easy, quick, and correct operation of the unit. Laser The machine features an innovative diode laser technology that reduces maintenance to only one intervention every 100,000 hours (on average) of operation. Extraction System The machine utilizes an extraction...

Washing Process The washing process is fully automatic and consists of the following cleaning stages: 1. Preparation: The operator will input the cylinder's diameter and width. 2. Cleaning: The machine will automatically position the laser unit and initiate the cleaning cycle (laser firing with vertical movement, rotational rotation, and extraction fan operation). 3. Completion: When the laser reaches the end of the cleaning, it automatically returns to its starting position. Once the cycle is finished, the operator should open the door and remove the anilox sleeve. Anilox Sleeve Cleaning Measurements...

Technical Specifications Power Supply Voltage: 220-230V 50Hz/60Hz Maximum Installed Power: 5kW Average Power Consumption: 3kW Cleaning Speed The cleaning speed for the 60W laser is approximately 25 minutes per square meter. The estimated cleaning time for a cylinder with dimensions of 1200mm length and 150mm diameter, providing an approximate cleaning area of 0.56 square meters, is about 20 minutes*. *NOTE: These are estimated times and may vary depending on the cylinder's characteristics (line screen, ink buildup, and cell saturation) as multiple passes may be required and depending on the configuration...