*mydirectindustry

I-DLS

Product catalog summary

Equipment Description
The I-DLS (Distribution Line System) is designed to distribute products such as inks, solvents, varnishes, or adhesives from storage tanks to various points within a facility. It automates product shipping processes, reduces transfer times, and minimizes spills. The system allows monitoring of consumption levels and report generation through management software. It includes a recirculation function to prevent product deposition inside the lines. An optional recirculating tank set can be installed to maintain a fixed minimum quantity of each product.

Installation Elements
The system includes a pumping unit with pneumatic pumps, connections and hoses, a pipeline from the warehouse, valves and solenoid valves, and a control panel with a touch screen. Calculations for pipe and pump diameters consider head loss and pipe distances, using Colebrook-White equations to ensure proper functioning.

Tanks
Stackable IBC plastic tanks with a capacity of 1000 liters can be installed. Features include high-density polyethylene material, a 2” connection with a shut-off valve, and a classic 4-way entry pallet. The tanks are approved for hazardous substances.

Shelving
The shelving is two-tier with a capacity for 3 IBCs per level, adjustable in height, and equipped with spill containment trays. It is suitable for storing flammable liquids and includes splash protection sheets and integrated slip protection.

Safety and Regulatory Compliance
The system complies with several regulations, including APQ ITC MIE 0 and ITC MIE APQ-10, which outline requirements for retention trays and spill prevention. Compliance depends on the client's facilities meeting specific conditions, such as safety regulations for warehouses storing flammable products, availability of fire extinguishing points, and forced ventilation to prevent gas concentration.

Catalog excerpts

Open the catalog to page 1

Equipment description The I-DLS (Distribution Line System) equipment is designed to distribute products used in the production process from storage tanks to various points within the customer's facility. The system is optimal for inks, solvents, varnishes, or adhesives. The purpose is to automate product shipping processes, reducing internal transfer times, and minimizing potential product spills. Moreover, with the I-DLS, it is possible to monitor consumption levels, generate reports, all from the specially designed management software. We can distribute all required products either to direct...

Open the catalog to page 2

Figures: Dispensing Table I nstallation Elements - Pumping Unit: Pneumatic pumps with the required inches and flow rate as per the project study, made of stainless steel with Teflon diaphragms. - Connections and Hoses - Pipeline from Warehouse Point - Valves and Solenoid Valves - Control Panel with Touch Screen - Others: The conduits will return to the initial tank through a pipeline of the same section and characteristics. We have two tanks for each ink, one above the other (the upper tank is not included and will be provided by the customer). To calculate the diameter of the pipes and pumps,...

Open the catalog to page 3

Tanks We can install stackable IBC plastic tanks, each with a capacity of 1000 liters, based on the customer's requirements. Features Capacity: 1000 L Dimensions: 1200x1000x1155 Weight: 58 Kg Material: High-density and high-molecular-weight polyethylene (HDPEHMWPE). Connection: 2” with shut-off valve (HDPE). Lid: Threaded Ø150mm, sealable. Pallet: Classic 4-way entry, stackable, and nestable. Maximum 3 heights. Approved for hazardous substances. Shelving Two-tier shelving with a capacity for 3 IBCs per level, designed to accommodate the 14 stackable IBCs. The shelving units are adjustable in...

Open the catalog to page 4

Open the catalog to page 5

Three-way valve division where it will be operated to dispense: Figure: Dispensing Pipelines Division. Safety Design Foundations and Applicable Regulations Regulatory Compliance - - APQ I TC MI E 0: Definitions and safety of retention tray or bund. - I TC MI E APQ-10: Article 10 of this ITC, "spill prevention," outlines all the requirements that a retention tray must meet. - I TC MI E-APQ 1 (complementary to the previous standard): Storage of flammable and combustible liquids. Points to Consider For this installation to comply with regulations, it depends entirely on the following conditions...

Open the catalog to page 6

2. Fire extinguishing points must be available in accordance with the ITC MIE-APQ 10 standard and the complementary ITC MIE-APQ 1. I N THI S CASE, they will be positioned above the tanks (Refer to the standard). 3. The warehouse must have forced ventilation to prevent gas concentration. I N THI S CASE, it should provide 4m³/min of extraction with a malfunction alarm. NOTE: The notes mentioned above do not exempt the client from reading and adapting their facilities according to the standard. They serve as a reminder of what the standard indicates regarding this type of warehouses. | P.I. El Puig...

Open the catalog to page 7

I-DLS

I-DLS

Catalog excerpts

All Inelme catalogs and technical brochures