Certified according to ISO 9001:2008 and EN14001:2004 by BSI. All products ROHS-compliant THE LATCH-HINGE WITH DECOMPRESSION COMPRESSION LATCH IN G H IN G E WITH SAFETY CATCH KLIMAFLEX™ SYSTEM Patented latching hinge, that may be used as hinge or latch according to need. Allows you to open door as left- or right hinged door, or to remove door completely. Universal left- and right assembly. Provides 6 mm compression and has a built-in safety catch for safe opening of pressurized doors. The halves clicks into distinct open and closed position for tactile feedback. 180° opening angle when used as a hinge. Vertical adjustability together with guidance between door and frame parts, makes it easier than ever to get the perfect sealed door. Available in non-locking, push-button, keyed and tool operated version. Also customizable with your logotype. Note that a normal panel will need four units in order to operate as either left-open, right open, or completely removable. Mount the door part with blind rivets (pop-rivets). The frame part may be mounted with screws or blind rivets. No problems with thermal break as units are surface-mounted on to door and frame parts, resulting in no parts intruding through the double skinned doors. Meets the requirements for sealing level L1 regarding positive or negative air pressure according to DIN EN 1886. Made from Polyamide (PA6) that meets the requirements for VDI 6022. Keys for insert may be found on pages: 2-370 and 2-372. MATERIAL: Door part and handle: Polyamide (PA6 with GF30), black. Frame part and latching cam: Die cast zinc, zinc plated. Hinge pin and assembly pins: Stainless steel. Spring: Steel. Insert: Die cast zinc, black texture powder coated. Cylinder: Die cast zinc. Cylinder cover and dust cover: Stainless steel (304). COMPRESSION LATCHING HINGE WITH SAFETY CATCH - KLIMAFLEX™ SYSTEM P/N Push-button operated Keyed alike IL101 (two keys included) Logotypes, other inserts, other colours and offsets from 0 – 25 mm offered upon request. BOX 214, SE 571 23 NÄSSJÖ, SWEDEN • www.industrilas.com TEL + 46 (0) 380 - 555 900 • FAX + 46 (0) 380 - 555 919

YOU CHOOSE! The new latching hinge combines the three most important features for accessing a HVAC-unit: 1. Opening and closing 2. Hinge function 3. Compression (up to 6 mm) The latching hinge is a hinge that may be latched - and a latch that may be used as a LIFT HANDLE The handle is recessed in the dish. Open the handle by lifting gently, and the spring will move the handle 90° to the upright position. LATCHING HINGE DECOMPRESSION In this position, decompression is initiated. The cam still holds the latch in closed position, safely allowing air to pass through the door and frame equalizing...