TWO AND THREE DIMENSION RECTANGULAR PRESS For pressing of ham and shoulder into moulds TWO AND THREE DIMENSION RECTANGULAR PRESS PE-1R/1050 AND PET-1R/1050 1050mm-length mould capacity A completely uniform product is an essential commercial requirement. Slicing process of cured hams, pork shoulders, etc., exact dimensions are of the utmost importance in order to prevent losses generated during the slicing process. The exclusive design of our pressing system with moulds is fundamental towards obtaining the best results, producing a perfect and homogeneous shape and increasing slicing yields. INDUSTRIES FAC, S.L. Crta C-63, Km 23 | 17430 SANTA COLOMA DE FARNERS (Girona-España) | Teléfono (34) 972 84 20 65 | Fax (34) 972 84 27 42 | [email protected] | www.industriasfac.com

TWO AND THREE DIMENSION RECTANGULAR PRESS FOR PRESSING HAM AND SHOULDER INTO MOULDS Once prepared, the pieces are introduced into the press. By simultaneously pressing two pushbuttons, and by means of hydraulic action, a lateral piston is activated, as well as other horizontal pistons. These pistons compress the piece in sequential pressure and stop cycles for uniform packing, delivering the work accomplished by the repeated pressing process to the entire piece. The ham and shoulder are inserted in the mould at the end of the process and after opening the gate. -Rectangular mould dimension 1050...