Specifications Sheet SPECIFICATIONS* • DualSense® Technology increases worker safety by using two sensors to detect the same gas • Guaranteed for Life with replaceable sensors and batteries that extends the life of the instrument • Optional AlarmAmp™ increases audible alarms to 110 dB ™ INSTRUMENT WARRANTY Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for three years. All other sensors are warranted for two years. DISPLAY Segment liquid crystal display (LCD) KEYPAD Two buttons CASE MATERIALS Case top: Polycarbonate with a protective rubber overmold Case bottom: Conductive polycarbonate PART NUMBER ALARMS Three strobe-emitting visual alarm LEDs (two red; one blue) 100 decibel (dB) audible alarm at a distance of 10 cm (3.94 in); Vibration alarm INSTRUMENT CONFIGURATIONS 99 x 51 x 35 mm (3.9 x 2.0 x 1.4 in) WEIGHT 126.0 g (4.4 oz) TEMPERATURE RANGE -40 °C to 50 °C (-40 °F to 122 °F) ** HUMIDITY RANGE 15% to 95% Non-condensing (continuous) DSX™ Docking Station for Tango® TX1 A – DSX Mode: 0 = DSX Standalone, 1 = DSXi Cloud-connected, 2 = DSX-L Local Server B – Number of Gas Inlet Ports: 3 = 3 Ports, 6 = 6 Ports C – Power Cord Type: 1 = North America, 2 = Europe, 3 = Australia, 4 = UK Replacement battery Soft nylon case, Black Soft nylon case, Safety Orange Dust barrier kit, 5 pack Water barrier kit, 5 pack CalCup and tubing kit Suspender clip AlarmAmp, Black AlarmAmp, Safety Orange Black nameplate Green nameplate Yellow nameplate Blue nameplate White nameplate * These specifications are based on performance averages and may vary by instrument. ** Operating temperatures above 50 °C (122 °F) may cause reduced instrument accuracy. Operating temperatures below -20 °C (-4 °F) may cause reduced instrument accuracy and affect display and alarm performance. Patent No. 9,000,910 – DualSense® Technology | Patent No. 9,064,386 – AlarmAmp™ AMERICAS Phone: +1-412-788-4353 1-800-DETECTS (338-3287) | [email protected] SENSORS CO, CO/H2, HCN, H2S, NH3 NO2, SO2 – Electrochemical sensor technology SENSOR MEASURING RANGES Ammonia (NH3): 0 to 500 ppm in 1 ppm increments Carbon Monoxide (CO): 0 to 1,000 ppm in 1 ppm increments Carbon Monoxide (CO/H2 low): 0 to 1,000 ppm in 1 ppm increments Hydrogen Cyanide (HCN): 0 to 30 ppm in 1 ppm increments Hydrogen Sulfide (H2S): 0 to 500.0 ppm in 0.1 ppm increments Nitrogen Dioxide (NO2): 0 to 150.0 ppm in 0.1 ppm increments Sulfur Dioxide (SO2): 0 to 150.0 ppm in 0.1 ppm increments BATTERY 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; non rechargeable; always on; up to 2-year run time depending on operating conditions DATA LOGGING 3 months at 10-second intervals EVENT LOGGING 60 alarm events CERTIFICATIONS INGRESS PROTECTION IP66/67 -40 °C to 50 °C (-40 °F to 122 °F) ATEX: Ex ia I Ma; Ex ia IIC T4 Ga; Equipment Group/Category: I M1/II 1G CSA : Cl I, Gr A-D, T4; Ex ia IIC T4 IECEx: Ex ia I Ma; Ex ia IIC T4 Ga INMETRO: Ex ia I Ma; Ex ia IIC T4 Ga UL (C-US): Cl I, Gr A-D, T4; Cl II, Gr E-G; Cl I, Zone 0, AEx ia IIC T4 -20 °C to 50 °C (-4 °F to 122 °F) China Ex: Ex ia IIC T4 Ga CMA: Ex ia I Ma; H2S, CO EAC: PO Ex ia I X; 0 Ex iX IIC T4 X KC: Ex ia IIC T4 ASIA PACIFIC Phone: +65-6561-7377 Fax: +65-6561-7787 | [email protected]