GasBadge • Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases • One-year data logging capacity (minimum) • Standard STEL and TWA • iNet® ready and DSX™ Docking Station compatible SPECIFICATIONS INSTRUMENT WARRANTY Guaranteed for Life™ - Instrument is warranted for as long as supported by Industrial Scientific Corporation (excluding sensors, batteries, and filters). CO, H2S, and O2 sensors are warranted for 2 years. All other sensors warranted for 1 year CASE Rugged, water-resistant polycarbonate shell with protective concussion-proof overmold. RFI resistant. DIMENSIONS 9.4 x 5.08 x 2.79 mm (3.7 x 2 x 1.1 in ) WEIGHT 85 g (3 oz) SENSORS CO, H2S, O2, NO2, SO2 NH3, CI2, CIO2, PH3, HCN, H2, CO/H2 Low MEASURING RANGES CO: 0-1,500 ppm in 1 ppm increments DISPLAY Custom LCD with graphical icons for easy use; Segmented display for direct gas readings; Backlight for low light conditions; “Go/No Go" display mode; Peak reading indication ALARMS User selectable low and high alarms Ultra-bright LEDs, loud audible alarm (95 dB) and vibrating alarm Specifications Sheet Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events. Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions. BATTERY RUN TIME User replaceable 3V, CR2 Lithium battery, 2,600 hour run time, typical DATA LOGGING 1 year continuous storage of data EVENT LOGGER Continually on. Logs last 15 alarm events, stamping how long ago the event occurred, the duration of the event, and the peak reading seen during the event. Event-logger can be viewed on PC or printed directly from the instrument to an infrared printer. TEMPERATURE RANGE -40 °C to 60 °C (-40 °F to 140 °F), typical HUMIDITY RANGE 0% to 99% RH (non-condensing), typical IP RATING Third-party certified IP64 CERTIFICATIONS ANZEx: Ex ia I/IIC T4 ATEX: Ex ia I/Ex ia IIC T4; Equipment Group/Category I M1/II 1G

Standard GasBadge® Pro configurations are listed below. To order the Australian-approved version, add an "A" as a suffix to the part number. All GasBadge® Pro Monitors Include: attached suspender clip, calibration adapter and tubing, and operating instructions. The DSX™ Docking Station easily maintains the gas detectors that keep your people safe in hazardous environments. • Know that your gas detectors are ready for use every day, every shift, without the burden of manual maintenance routines • Stop worrying about calibration gas and let the DSX monitor and order replacement gas cylinders when...