BUMBMgO* Bump Test Where the Work Is Bump testing gas detectors before each day's use is the only way to be sure that the sensors respond to gas. But if your team works on the go, they might not have access to a docking station or calibration gas to check their monitors. By the time they enter hazardous areas, they may not even realize something is wrong with the monitor, until it is too late. Your team needs a solution that goes where the work is, so they can test their gas detectors regardless of location. Introducing the Ultra-Portable Bump-N-Go™ • Bump test anytime, anywhere with the pocket-sized gas cylinder • Get 250 bumps out of one bottle, at a lower cost-per-bump, thanks to a pushbutton regulator that eliminates wasted gas • Enjoy lower shipping costs because there are no hazardous material fees for ground shipments • Save time and money by ordering the six-pack option Gas detectors can only help you if they are working properly, and the easiest way to know is if you remember to Bump-N-Go. See the Bump-N-Go in action at www.indsci.com/bump-n-go SPECIFICATIONS CYLINDER SHELF LIFE 1 year CYLINDER HEIGHT 97.5 mm (3.84 in) CYLINDER DIAMETER 48 mm (1.90 in) CYLINDER WEIGHT .204 kgs (0.45 lbs) TEMPERATURE Protect from sunlight and do not expose to temperatures exceeding 50 °C (122 °F) CYLINDER STORAGE Remove regulator prior to storage. Cylinders should be firmly secured to prevent falling or being knocked over. Store in a dry, well-ventilated area, away from sources of heat, ignition, and direct sunlight. USE Bump-N-Go Cylinders are for bump testing only. Do not use for calibration. INDIVIDUAL CYLINDERS REGULATOR 18109565 Pushbutton regulator for use with Bump-N-Go Cylinders INDUSTRIAL SCIENTIFIC AMERICAS Phone: +1-412-788-4353 1-800-DETECTS (338-3287) | [email protected] ASIA PACIFIC Phone: +65-6561-7377 Fax: +65-6561-7787 | [email protected] Rev 0 0418 Visit our website for a list of worldwide locations EMEA Phone: +33 (0)1 57 32 92 61 Fax: +33 (0)1 57 32 92 67 | [email protected]