END-OF-ARM TOOLING TRANSPORTER® CYLINDER ACTUATED SPECIFICATIONS Permanent Magnetic, Air Release Tooling/End Effectors TPCA200CM (Covered Magnet Face) Transporter® Magnets are ideal for use where vacuum cups and grippers are typically used for lifting and moving steel sheets, blanks, stamped parts and complete assemblies. Applications & Benefits: » » » » » » » Robotic “Pick & Place” Manual and automated machine loading/unloading Increases production and minimizes shop air costs Designed for long, maintenance free operation Operates effectively in any orientation Will not drop parts if system air-loss occurs Destacking (requires proper magnet selection) Transporter® Cylinder Actuated (TPCA) Magnets: TPCA200EM (Exposed Magnet Face) The patented Transporter® utilizes a powerful, Rare Earth, Permanent Magnet Circuit to pick and place metal parts in automated transfers or lift-assist material handling applications. TPCA's are designed to handle heavier parts than our TPLP (Transporter® Low Profile) series. Stamped, forged and hydro-formed parts or complete parts assemblies, TPCA's provide material handling safety while significantly minimizing shop air costs. Ideal for applications in Automotive under body parts, Lawn/Farm equipment components, Application pumps, compressors, motors and fan assemblies. Note: IMI does not provide on-site plumbing; Air Supply Must Be Clean, Dry, Compressed Air Regulated To 85-90 PSI TPCA200CMDS (Covered Magnet Face, Destacker) Instantaneous pickup and release Permanent magnet requires no electricity Can be retrofitted on existing tooling Positively holds parts - no dropping 3:1 Design Factor Magnetic Pistons, for Limit Switches, standard on TPCA300 - TPCA800 series Solenoid control valves Custom designed Pole Shoes Magnet mounted control valves Magnets designed into ergonomic lifting systems Custom circuit designs are available Magnetic Pistons, for Limit Switches, available on TPCA100 & TPCA200 series Industrial Magnetics Inc. 1385 M-75 S, Boyne City, MI 49712 » Office: 1.231.582.3100 Office: 1.231.582.3100

INDUSTRIAL MAGNETICS. TPCA100 SERIES SPECIFICATIONS: » Two 1/8 NPT cylinder air ports » Polyurethane magnet housing TPCA200 -TPCA500 SERIES SPECIFICATIONS: » Two 3/8 NPT cylinder air ports » Stainless Steel magnet housing » Destacking (DS) versions available Industrial Magnetics Inc. 1385 M-75 S, Boyne City, MI 49712 Office:1.231.582.3100

Specifications for TPCA600-TCPA800 series The TPCA600-800EM's are capable of handling heavier parts than the standard Transporter® series, such as tubes, castings or complete parts assemblies, and provide material handling safety with minimal shop air costs. Offering a slim profile, instantaneous pickup and release and requiring no electricity, these Transporter® Cylinder Actuated Magnets are ideal for lifting in and out of totes, bins, or other hard to maneuver applications such as, components for automotive, lawn/farm equipment, pumps, compressors or motors and fan assemblies. TPCA800CM Shown...

TPCA Magnets Customized For Lifting And Moving Steel Parts Pictured left are Transporter® Cylinder Actuated magnets designed to pickup odd shaped parts such as a large truck spring and a solid steel gear used in large machinery. Not typical applications you would think a magnet would work on due to the round shapes and various steel thickness, however the Transporter® technology combined with custom curved and angled faces can solve these material handling needs. Pictured lower left is a Transporter® Cylinder Actuated magnet assembly that is designed to move weldments out of a robotic weld cell....