Gate gas spring F100600/BB/0100
3Pages

Gas spring order code: With a force of 100 Newtons: F100600/BB/0100 With a force of 200 Newtons: F100600/BB/0200 With a force of 300 Newtons: F100600/BB/0300 Price breaks. Unit price depends on the quantity of gas springs ordered: Quantity ordered 1 to 4 5 to 14 15 to 49 50 to 99 Gas spring unit price £105.87 £65.39 £40.48 £37.37 Packing & Carriage cost £15.90 £15.90 £19.60 £23.90 Supplied with: ƒx 1 x gas spring reference: 8/23-250-690(726)-SME-SME-BV100N-FD (fitted with 2-off Metal Eyes) ƒx 2 x nylon ball joints Industrial Gas Springs Ltd Mitcham CR4 4HR 020 8646 6595 H I G H P R E S S U R E - D O N O T O P E N Ø8 Ø28 10 Stroke 250 Shoulder Length 690 Ø32 Ø23 METAL EYE Ø8.2 Blade width = 9.0 18 10 METAL EYE Ø8.2 Blade width = 9.0 18 10 250mm stroke gate gas spring - Kit Industrial Gas Springs Ltd 22 Wates Way, Mitcham, Surrey CR4 4HR Tel: 020 8646 6595 - Fax: 020 8646 6594 Email: sales@igsltd.co.uk www.industrialgassprings.com Page 1 of 3 A - Stainless steel A B - Painted black mild steel B B C - Aluminium D - Nylon C C NYLON BALL JOINT NYLON BALL JOINT M8 x 1.25 M6 x1.0 13 11 Ø10 18 M8 x 1.25 M6 x1.0 13 11 Ø10 18 D D FEATURES • Slow and safe closing motion of gates • From 100 up to 300 Newton (30kg) • Progression factor k = 1.3 • Includes a force release valve • Free in compression • Fully damped in extension • Stainless steel rod • Protective metal shroud • Black painted resistant steel body and shroud • Operating temperature: -25ºC to +70ºC • Supplied as a kit with 2 nylon ball joints with studs and 2 metal eyes. If required, brackets and extra end-fittings must be ordered separately.

Ball joint Stainless steel 304 Code: F06-XMB-D10 Unit price: £ 6.67 each 25 12 11 M6 M6 Type C Bracket Zinc plated steel Code: FC-8 Unit price: £ 4.30 each 10 75 Ø6.5 2.5 Ø8 Ø6.5 10 Locking nut Bush Cheese Head Screw 13 18 20 Optional extras Page 2 of 3 Gate gas spring - Accessories Industrial Gas Springs Ltd 22 Wates Way, Mitcham, Surrey CR4 4HR Tel: 020 8646 6595 - Fax: 020 8646 6594 Email: sales@igsltd.co.uk www.industrialgassprings.com Ball joint Zinc plated steel Code: F06-MB-D10 Unit price: £ 1.30 each 25 12 11 M6 M6 Ø10 Ø10 Type A2 Bracket Zinc plated steel Code: FA2-10 Unit price: £...

Typical position of the gas spring and end-fittings on a gate: Page 3 of 3 STYLE C Bracket Door stop This solution will only work when the gas spring can be fitted as per the above drawing, or in a very similar position. If the gate is not fully free to rotate (friction in the hinge), then you will need to order a slightly stronger gas spring charged at 200 or 300 N. Installation • First fit a bracket/fixing at point F in such way that the centre of the mounting point is between 120 and 165mm away from the centre of the pivot point (maximum value is also the best: 165mm), about 45° behind...