^SIMPLE CONFIGURATION ^IN-HEAD MOUNTING incorporated the latest digital technology to provide accurate and reproducible conversion of 2 or 3-wire RTD signals to industry standard 4-20 mAoutput. This, in-head-mounted transmitter, is unique, because it does not need a PC, solder linking or a potentiometer for configuration. By generating the required low and high signals with a calibrator or an RTD simulator and push of the button on the transmitter, configuration is complete. High accuracy and drift-free linearisation coupled with flexibility of reduced stock holding and quick push button calibration make the SEM203P the ideal choice for converting RTD outputs to 4-20 mAsignals. An on-board LED indicates the successful completion of configuration procedure and also provides instant indication of the sensor's fault. Sensor Range Minimum Span Excitation Current Lead Resistance Sensor Lead Length Output Range Supply Voltage Voltage Effect Output Accuracy Output Thermal Drift Loop Resistance Loop Noise Sample Rate Thermal Drift Operating Temperature Storage Temperature Molded case; NORYL™ Reverse polarity protected Via the on-board push button 1-15 W. Pearce St., Richmond Hill, Ont. L4B 1H6, Canada