Indicating Temperature Transmitter > DUAL UNIT DISPLAY (°C or F) ^STAINLESS STEEL CASE ^MAX/MIN TEMPERATURE LOGGING ^ADJUSTABLE RANGE Indumart DTT50 Series Indicating Temperature Transmitters are high-accuracy, high-resolution, microprocessor based instruments. Because of their robust design, these transmitters meet stringent demands and can also be used in critical industrial applications where particular importance is attached to measuring accuracy, reproducibility, long term stability and protection against water immersion and dust Housed in a rugged IP67 stainless steel instrument case, the Series DTT50 transmitters are supplied either with a Pt- 1000 RTD or with a thermocouple sensor. They may be ordered as panel mounting instruments with either three-hole front flange or back flange, or as direct mounting instruments with a 316 stainless steel rigid stem. The stem for all models is compatible with most gases and liquids, and, if require for special food or hygienic applications, a captive B" or 1" hygienic fitting will befitted to The four-digit, 12.7 mm high LCD display can show temperature in either °C or °F, and the operator may switch between the two units at Transmitters are fitted with Min/Max capability, which stores the minimum and maximum measured temperatures. These temperatures may be displayed or cleared by means of magnetically-operated switches without opening the sealed case. Calibration of the transmitter's 4-20 mA loop circuit is easy and can be performed at site. As a standard practice, all DTT50 Series are calibrated at 20°C. Calibration procedure is also supplied with every transmitter to enable the end user to carry out periodic calibration The instrument can be configured to transmit a 4-20 mA signal across either the full, or part

Case Diameter Protection Class Display Unit Display Update Rate Process Connection Stem Material Stem Diameter Electrical Connector Loop Supply Loop Ranging Ambient Temperature 304 St. steel with bezel Safety glass (option) Plane; Compression fitting; Mating plug with 2 m cable Adjustable across the full or part of the measurement range Reverse loop polarity protected Measuring Range Temp. Stability - Zero: ambient temp, from 20°C Temp. Stability - Span: ±0.003/°C for changes in ambient temp, from 20°C Thermocouple Sensor Sensor Type "K" thermocouple Temp. Compensation Automatic; Error included...