INDUMART Canada www.indumart.com Battery Powered Digital Pressure Gauge SERIES: DG50 ^ HIGH ACCURACY (±0.2% F.S.) ^ 4-DIGIT LCD DISPLAY ^ STAINLESS STEEL CASE ^ IP-67 PROTECTION (WATERPROOF) ^ LONG BATTERY LIFE (2 AA) ^ LOW BATTERY WARNING ^TEMPERATURE COMPENSATION ^ DIAPHRAGM SEALS (OPTION) ^ INTRINSICALLY SAFE (OPTION) ^ AVAILABLE RANGES: VACUUM TO 6000 PSI (400 BAR) EE* ia lie T4- ( 2B°C < Ta< 60‘C| I11 G BASEEFA CERTIFICATION No. BAS 99 ATEX ICKMX DO NOT CHANGE BATTERY IN A POTENTIALLY k EXFIOSiVE ATMOSPHERE y INTRODUCTION Indumart DG50 Series Digital Pressure Gauges / Test Gauges are high-accuracy, high-resolution pressure indicators. Because of their robust design, these gauges meet stringent demands and can be used in critical industrial applications where particular importance is attached to measuring accuracy, reproducibility, long term stability and protection against water immersion and dust penetration. The electronics and sensing element of the DG50 Series are housed in a 4" diameter, stainless steel case. The measuring element is an alumina ceramic diaphragm strain gauge, compatible with most gases and liquids. When used for food applications, the DG50 Series may be supplied with hygienic fittings, and for viscous or corrosive media services diaphragm seals can be included at the time of ordering. The four-digit, 12.7 mm high LCD display can show pressure measurements in either of the two selected units of measurements. The two units of measurements are selected by the customer at the time of ordering and operators may switch between the two units at the site. As a standard practice, all DG50 Series are calibrated at 20°C. If working constantly at a higher or a lower temperature, the instrument can be calibrated to the user specifications. While operating at a significant temperature range, temperature compensation will correct both zero and span drifts. If the DG50 Pressure Gauges are to be used in potentially explosive environments specified to EEX ia IIC T4, the intrinsically safe option must be ordered for optimum safety.

Accuracy Case & Bezel Case Diameter Display Sensor Connection Pressure Ranges Over Pressure Temp. Compensation Storage Temp. Ambient Temp. Medium Temp. Case Temp. Power Battery Life Low Power Warning Explosion Protection Display Update Rate Protection Class Weight PRESSURE RANGES & PERFORMANCE SPECIFICATIONS ±0.2% of full scale 304 stainless steel 100 mm 4-digit LCD; 12.7 mm high Alumina ceramic (Al203) diaphragm strain gauge Back, bottom; %" male; St. steel Variable ranges: vacuum up to 6000 psi - see the table 1.25 x max. pressure -10...+60°C -20...+85°C -10...+60°C -20...+100°C -10...+60°C...