Catalogs >
INDUKEY >
Capacitive Touch Button

Capacitive Touch Button
1Pages

Catalog excerpts

CAPACITIVE TOUCH BUTTON WITH LIGHTING TECHNICAL DATA Button dimensions: L 45.0 x W 45.0 x H 10.0 mm Glass diffusing lens: L 35.0 x W 35.0 mm as the optically usable area LED lighting colour: standard, white Type of lighting: surface illumination Button in stand-by mode: dimmed (to help people find the button) Actuation feedback: full lighting intensity ASSEMBLY HINTS • In its standard form, the individual capacitive touch button can be used on panels with the following material thicknesses: Glass: up to 6 mm Acrylic: up to 3mm • Variations of the above dimensions and materials with individual designs are possible on request and can be considered • The component is affixed to the relevant front supporting CONNECTING PARAMETERS material fully and without any bubbles using an optically neutral Contactable solder pads: location and configuration – see diagram layer of adhesive (in the visible area) at the bottom of the document Energy supply: 24V DC +/- 10% Pin-outs (K1a or K1b): PhotoMOS relay with max. 60 V 550 mA, typically 0.85 Ω contact resistance GETT Gerätetechnik GmbH Mittlerer Ring 1 08233 Treuen / GERMANY

Open the catalog to page 1