Catalogs >
Inductoheat Europe GmbH >
STATIPOWER® SP16

STATIPOWER® SP16
2Pages

Catalog excerpts

® STATIPOWER SP16 Transistorized Induction Heating Power Supplies Features/Benefits: • 3, 10, 30 and 50 kHz with models available from 50 kW to 1200 kW • Rated for continuous or intermittent duty • Variable ratio output isolation transformer for load impedance matching • Internal load matching capacitors for full power operation over a wide range of load conditions • Input power factor is 0.95 under all operating conditions • Output regulation accuracy is ±1% of rated power with ±10% line variance to ensure precise process control • Single control board. Field replaceable without adjustment for easy maintenance • Holding mode for consistent very low power operation • Restart circuitry eliminates nuisance shutdowns caused by voltage transients, ground faults and shorted or arching loads SP16 150 kW / 30 kHz Power Supply For General Purpose Induction Heating Unitized Design For Stand-Alone Operation Remote or Computer Controlled Operation The STATIPOWER® SP16 is designed to match multi-turn coils (400- 2000 V) that are used for multi-turn hardening or tempering, tube heating, crystal growing, wire and strip heating and many other induction heating applications. A wide variety of heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer. Simply connect three phase 480 V input power, cooling water and heating coil and you’re ready to begin heating. The cabinets are designed to accommodate a variety of fixtures, conveyors and part handling machines. Complete stand-alone control and monitoring include: Manual start/stop push buttons, heat level control with 10-turn lockable dial, four meters and annunciator lights to monitor all operating parameters. Remote control can be accomplished by connection to the user interface provided. Heat level can be controlled by a remote potentiometer or 0-10 V analog signal from a PLC. Options include a 4-20 mA process control signal or RS-232/485 interface for remote computer monitoring, data logging and control. For more information, call 800/624-6297 or visit www.inductoheat.com

Open the catalog to page 1

Inductoheat Inc., 32251 N. Avis Drive Madison Heights, MI 48071 TEL: (248) 585-9393 FAX: (248) 589-1062 ® STATIPOWER SP16 Transistorized Induction Heating Power Supplies SPECIFICATIONS: ELECTRICAL OUTPUT kW Rating at Given Frequency 3kHz 10kHz 75 75 30kHz 50kHz 50 75 100 150 150 150 200 300 300 300 300 400 450 600 450 600 450 600 UTILITY INPUT REQUIREMENTS Cooling Water kVA gpm (lpm) 62 94 125 186 250 375 375 500 558 745 14 (53) 14 (53) 20 (75) 22 (84) 24 (92) 26 (98) 30 (114) 38 (144) 50 (190) 75 (284) CABINET DIMENSIONS Width x Depth x Height in. (mm) 36 x 30 x 76 (915 x 760 x 1930) 36 x...

Open the catalog to page 2