Catalogs >
Inductoheat Europe GmbH >
STATIPOWER® SP11

STATIPOWER® SP11
2Pages

Catalog excerpts

® STATIPOWER SP11 Radio Frequency Induction Heating Power Supplies Features/Benefits: • Application flexibility with a tuning range of 50-200 kHz. • Continuous or intermittent duty • 100% solid state design. • Ideal replacement for less efficient oscillator tube power supplies. • High, 0.95 input power factor under all operating conditions. • ±1% output regulation accuracy with ±10% line variance under all operating conditions. • Single control board for reliable operation and simplified maintenance. • Analog display of voltage, frequency, current and output power. • Built-in digital heat timer. • Optional RS-232/485 interface for automatic operation under computer control. • Built-in load matching capacitors and variable ratio isolation transformer. RF Power Supplies For General Purpose Induction Heating ® STATIPOWER SP11 is a self-contained, stand-alone solid state transistorized power supply for heating a wide variety of parts. Application capabilities include hardening, tempering, brazing, soldering, melting, bonding and shrink fitting. A broad range of single-turn and other low impedance heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer. SP11 100 kW / 150 kHz Compact Design For Stand Alone Operation ® STATIPOWER SP11 power supplies are up to 80% smaller and up to 2,000lbs. lighter than conventional RF power supplies. This efficient use of space is achieved without sacrificing performance. Output power regulation is ±1% with up to ±10% line variance; the input power factor is 0.95, regardless of loading; and energy conversion efficiency exceeds 85% (a tube style RF oscillator is typically 50% efficient to the load). Manual or Computer Controlled Operation All controls necessary for stand-alone ® operation are built into STATIPOWER SP11 power supplies. This includes a digital heat cycle timer, analog meters for voltage, frequency, current and power, and LED operating and diagnostic indicators. For automatic control and/or record keeping, an optional RS-232/485 interface is available. The only installation requirements are power and water. For more information, call 800/624-6297 or visit www.inductoheat.com

Open the catalog to page 1

Inductoheat, Inc. 32251 N. Avis Dr., Madison Heights, MI 48071 TEL: (248) 585-9393 FAX: (248) 589-1062 ® STATIPOWER SP11 Radio Frequency Induction Heating Power Supplies SPECIFICATIONS: Output Power at 50-200 kHz Input kVA (max.) Water Req. for 25 psi Pressure Drop Dimensions WxDxH in. (mm) Shipping Weight Pounds (kg) Floor model 50 kW 62 kVA Floor model 100 kW 124 kVA Floor model 150 kW 190 kVA 10 gpm (38 lpm) 18 gpm (68 lpm) 30 gpm (110 lpm) 40x40x72 (1016x1016x1800) 52x40x72 (1300x100x1800) 52x40x72 (1300x100x1800) 770 (349) 980 (445) 1100 (500) COMMON FEATURES: Energy Conversion...

Open the catalog to page 2