IROSS? Pipe-End Heating Units Flexible, 50/60 Hz heating solutions for tube & pipe

Product catalog summary

Overview: The IROSS™ Pipe-End Heating Units are designed for heating various tubular products using patented fluxmanager technology, providing superior temperature uniformity compared to conventional designs. These units are suitable for applications such as preheating for welding, hardening, annealing, normalizing, and stress relieving.

Specifications: The units operate at a standard power rating of 165 kVA, 50/60 Hz, single phase, with a cooling system that uses a standard water-to-water recirculation system. They accommodate pipe outer diameters ranging from 2.375” to 20.625” (61 mm to 473 mm) with different coil assemblies available. The transformer and control dimensions are 82” x 52” x 72” (2082 mm x 1320 mm x 1830 mm), and the coil with hydraulic lift table dimensions are 36” x 60” x 48” (915 mm x 1525 mm x 1220 mm).

Features and Benefits: The units offer deep and uniform temperature distribution, meeting or exceeding API® tube and pipe specifications. They are flexible, covering all OCTG pipe sizes with four coil diameters, and modular with robust and unitized systems. Additional features include infrared and thermal image monitoring, data logging for traceability, and shaped flux concentrators for increased efficiency. The units do not require deionized water and are versatile with 50 or 60Hz / 350 - 600VAC input.

Safety and Options: Safety features include extruded aluminum and expanded metal trim. Optional accessories include infrared temperature control, thermal imaging cameras, energy monitors, recipe management, and pneumatic coil shuttles. The units require plant water at 10 gpm @ 50 psi @ 110ºF max and have no plant air requirements. Input voltage options include 440, 460/480 volts, with international options of 380, 400, and 575 volts.

Contact Information: For more information, contact Inductoheat Inc. at 1.800.624.6297 or [email protected], or visit www.inductoheat.com.

Catalog excerpts

IROSS? Pipe-End Heating Units Flexible, 50/60 Hz heating solutions for tube & pipe-1

IROSS™ Pipe-End Heating Units Flexible, 50/60 Hz heating solutions for tube & pipe IROSS™ Pipe-End Heating Units are designed specifically for heating a variety of tubular products. These systems utilize patented fluxmanager technology that yields superior temperature uniformity compared to conventional medium frequency designs. • Preheat for welding & swaging • Hardening • Annealing • Normalizing • Removal and cure of coatings • Friction weld and swage stress relieving Fluxmanager Features/Benefits: • Deep and uniform temperature distribution, ID/OD, laterally, and longitudinally along extended lengths of pipe ends • Achieves uniformity requirement ∆T = +/- 77ºF (25ºC), even when tubes are positioned non-concentric • Meets or exceeds API® tube & pipe specifications • Flexible: 4 coil diameters cover all OCTG pipe sizes • Modular: Robust and unitized system • Infrared and thermal image monitoring options • Data logging capability for traceability • Shaped flux concentrator for increased efficiency • Deionized water NOT required • Versatile: 50 or 60Hz / 350 - 600VAC input Thermal image (left), shows advanced temperature control for AISI 8630 Modified. • 75/8” (194 mm) dia. - 3/4” (19 mm) wall • Heat length 12” (304 mm) • 93 sec. 20ºF (6ºC) range observed. Sample only: Each application is validated separately due to different thickness, length and temperature requirements. For more information, call 1.800.624.6297, email: [email protected] or visit www.inductoheat.com

Open the catalog to page 1

IROSS? Pipe-End Heating Units Flexible, 50/60 Hz heating solutions for tube & pipe-2

IROSS™ Pipe-End Heating Units Flexible, 50/60 Hz heating solutions for tube & pipe IROSS™ Pipe-End Heating Units: Specifications Standard Power Rating 165 kVA, 50/60 Hz, Single Phase Cooling System Standard water-to-water recirculation system Standard Coil Assembly For Pipe O.D. Sizes: # 762 2.375” # 1062 7.625” # 1462 10.625” # 2062 14.625” - Shipping Weight Transformer/Controls: 1200 lbs. (545 kg) Coil Table: 1400 lbs. (635 kg) Transformer/Control Dimensions 82” (2082 mm) x 52” (1320 mm) x 72” (1830 mm) (Other sizes available upon request) (Other sizes available upon request) 7.625” 10.625”...

Open the catalog to page 2