TurbiTechw² Suspended Solids and Turbidity Sensors SUSPENDED SOLIDS OR TURBIDITY MONITORING PROVIDES AN EXCELLENT INDICATOR OF PLANT PERFORMANCE, ALLOWING USERS TO REACTS TO CHANGES IN INFLUENT QUALITY, EQUIPMENT BREAKDOWN AND PROCESS CHARTERISTICS. BY HAVING THIS INFORMATION AVAILABLE 24 HOURS PER DAY, LARGE SAVINGS CAN BE MADE IN ENERGY AND CHEMICAL USE AND TIME AS WELL AS IMPROVING ENVIRONMENTAL WATER QUALITY. EASE OF USE • The market leading TurbiTechw² range of sensors are designed for monitoring Suspended Solids and/or Turbidity and incorporate a fully automatic self contained slef-cleaning system. It is the selfcleaning system that makes these sensors expectionally reliable and easy to operate. ACCURATE MEASUREMENTS • The sensors use a solids state infrared light source providing a stable and long lasting basis for the measurements, the optical surfaces and sample volumes have deliberately been kept large to improve tolerance of fouling during the periods between the automatic self-clean action. LESS EXPENSIVE • The mechanical cleaning system means that there is no need for expensive and troublesome compressors that are required for air blast cleaning. The sensor can be serviced in minutes without the need for specialist training. • The LS version of the TurbiTechw² sensor uses 90° Light Scatter as their operating principle. They are compliant with the international standard for Turbidity monitoring ISO 7027. • The TurbiTechw² LA & HR Sensors have been designed for use in aeration systems. The TurbiTechw² HR Sensor is suitable for monitoring solids in higher ranges than the standard LA version of the sensor due to it’s shorter path length. PARAMETERS • Turbidity • Total Suspended Solids Applications: • FINAL EFFLUENT • INTAKE PROTECTION • PRIMARY SETTLED • SLUDGE • MLSS • ACTIVATED SLUDGE • RAS

TurbiTechw² Suspended Solids and Turbidity Sensors GENERAL PARTECH TURBITECHW² SUSPENDED SOLIDS AND TURBIDITY SENSORS CABLE LENGTH 10 metres standard, 100 metres maximum SERVICE REQUIREMENTS Automatic Self Cleaning Seal Service every 3500 cleans (application dependent) PROTECTION CLASS INSTALLATION TYPE ENCLOSURE MATERIAL Black Acetal Co-Polymer MOUNTING SHAFT 1 to 3 metres in 1 metres increments CABLE ENTRIES Intergral Cable Gland OPERATING TEMPERATURE WETTED PARTS Black Acetal, 316 Stainless Steel, Glass, Polyurethane, Nitrile POWER SUPPLY CABLE TYPE 4 core, 2 Twisted Pair, 9 mm O/D Polyurethane...