TurbiTechw² D-ISO Turbidity Sensor THE TURBITECHw² D-ISO SENSOR HAS BEEN SPECIFICALLY DESIGNED TO MONITOR FINAL TREATED, POTABLE AND FILTER WATER. THIS EXTREMELY SENSITIVE SENSOR CAN MEASURE CHANGES IN TURBIDITY OF LESS THAN 0.01 NTU. RELIABLE • The flow-through cell design captures stray light to ensure a stable zero point. • The automatic self-cleaning mechanism prevents the build up of fouling in and around the chamber, making it the benchmark for low-range turbidity measurement. • The global standard light-scatter technique makes the sensor sensitive to a wider range of particle sizes. LOW-MAINTENANCE • Low-maintenance operation, with no tools or training required. • To calibrate, use either a wet turbidity standard or the dry calibration reference cell supplied with the sensor. • The reference cell provides an extremely easy, repeatable method of checking sensor performance without the cost and inherent errors associated with chemical standards. ISO COMPLIANT • The sensor complies with the internationally recognized ISO7027 standard for turbidity measurement. FULLY SUPPORTED • We provide total field support • Technical support is just a phone call away. Applications: • RAW WATER • PROCESS CONTROL • FINAL WATER MONITORING • FILTERED WATER • FILTER BACKWASH CONTR

TurbiTechw² D-ISO Turbidity Sensor GENERAL TurbiTechw² D-ISO Sensor CABLE TYPE 4 core, 2 twisted pair 5 mm outside diameter, polyurethane coated CABLE LENGTH 5 metres as standard, other lengths can be supplied on request PROTECTION CLASS SERVICE REQUIREMENT Wiper replacement annually as required (application dependent) CABLE ENTRIES Integral Cable Gland OPERATING TEMPERATURE WETTED PARTS Black acetal, Polypropylene, Nylon, Chrome Plated Brass, Spectrosil 2000, Nitrile POWER SUPPLY PROCESS CONNECTIONS Inlet and drain: ½” BSP with 12 mm hosetail Outlet: ¼” BSP with 5 mm hosetail SENSOR OUTPUT MINIMUM...