Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. imt Tool Solutions GmbH
  3. ISOLOX

ISOLOX

ISOLOX
1 / 5 PagesView full catalog

ISOLOX

Product catalog summary
Identification of the Substance/Mixture and Company:
Product Name: ISOLOX Thermoplastic Dipping Compound. It is used as a clear coating for transport protection. Supplier: imt Tool Solutions GmbH, Germany.
Hazards Identification:
The product is not classified as hazardous under Regulation (EC) No. 1272/2008. Precautionary measures include avoiding inhalation and contact with skin and eyes, and seeking medical advice if ingested or if irritation occurs.
Composition/Information on Ingredients:
The product contains no hazardous substances as per Regulation (EC) No. 1272/2008.
First Aid Measures:
Inhalation: Move to fresh air. Skin: Wash with soap and water. Eyes: Rinse with water. Ingestion: Seek medical attention if large quantities are swallowed.
Firefighting Measures:
Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide to extinguish fires. Avoid high volume water jets. Hazardous decomposition may produce carbon oxides.
Accidental Release Measures:
Ensure ventilation, avoid contact, and use protective equipment. Prevent product from reaching water systems. Clean up by sweeping or shoveling into containers.
Handling and Storage:
Avoid contact and dust formation. Store in a cool, dry, and well-ventilated area away from heat and oxidizing agents.
Exposure Controls/Personal Protection:
Use safety glasses, protective gloves, and suitable clothing. Respiratory protection is not normally required.
Physical and Chemical Properties:
Translucent solid at 20°C, liquid at 150°C. Flash point is 223°C. Insoluble in water.
Stability and Reactivity:
Stable under normal conditions. Avoid dust, heat, and open flames. Incompatible with strong oxidizing agents.
Toxicological Information:
No acute or chronic effects known. Oral LD50 (rat) > 6400 mg/kg.
Ecological Information:
Expected to have low biochemical oxygen demand and low impact on aquatic organisms. Non-biodegradable with low bioaccumulation potential.
Disposal Considerations:
Dispose of in accordance with local regulations.
Transport Information:
Not classified as dangerous goods.
Regulatory Information:
Complies with REACH. Classified as slightly hazardous to water (German WGK Class 1).
Other Information:
This SDS is based on current knowledge and does not guarantee product properties.
See more

Catalog excerpts

ISOLOX-1

SAFETY DATA SHEET V1.2 ISOLOX According to Regulation (EC) No. 1907/2006 (REACH) and Regulation (EC) No. 1272/2008 (CLP) | Revised on: 2025_07_16 Trade name: ISOLOX Thermoplastic Dipping Compound l^mL Tool S&iutionA. Kompetente Beratung seit 1978 imt Tool Solutions FrauenwaldstraBe 11 82383 HohenpeiBenberg

 Open the catalog to page 1
ISOLOX-2

SAFETY DATA SHEET V1.2 ISOLOX This product contains no substances classified as hazardous according to Regulation (EC) No. 1272/2008. ♦ Hazardous decomposition products may include carbon oxides. ♦ Fine dust dispersed in air may form explosive mixtures. ♦ Wear self-contained breathing apparatus. ♦ Prevent fire extinguishing water from contaminating surface or groundwater. imt Tool Solutions T: +49 8805 95990-29 imt Tool Solutions Kompetente Beratung seit 1978 E: [email protected] FrauenwaldstraBe 11

 Open the catalog to page 2
ISOLOX-3

SAFETY DATA SHEET V1.2 ISOLOX Ensure adequate ventilation. Avoid contact with eyes, skin, and clothing. Use personal protective equipment. Prevent further leakage or spillage if safe to do so. Do not allow product to reach water systems. Sweep or shovel up into suitable containers. Clean affected area with water. Avoid contact with skin, eyes and clothing. Provide sufficient ventilation. Avoid dust formation. Keep container tightly closed in a dry, cool, and well-ventilated place. Store away from heat sources and oxidizing agents. Clear coating for transport protection. No occupational exposure...

 Open the catalog to page 3
ISOLOX-4

SAFETY DATA SHEET V1.2 ISOLOX No hazardous reactions known. Stable under normal conditions. None under recommended conditions. Dust formation, heat, open flames. Strong oxidizing agents. Carbon oxides under fire conditions. Based on similar products, oral LD50 (rat) > 6400 mg/kg. No acute or chronic effects known. ♦ Not tested. Based on composition, expected to have: ♦ Low biochemical oxygen demand ♦ Low impact on aquatic organisms imt Tool Solutions T: +49 8805 95990-29 imt Tool Solutions Kompetente Beratung seit 1978 E: [email protected] FrauenwaldstraBe 11

 Open the catalog to page 4
ISOLOX-5

SAFETY DATA SHEET V1.2 ISOLOX SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods Dispose of contents/container in accordance with local regulations. SECTION 14: TRANSPORT INFORMATION Not classified as dangerous goods under transport regulations. SECTION 15: REGULATORY INFORMATION REACH: Complies with requirements or listed German WGK (water hazard class): Class 1 (slightly hazardous to water) SECTION 16: OTHER INFORMATION This SDS is based on current knowledge and experience. It is not a guarantee of product properties and does not establish a contractual legal relationship. Users...

 Open the catalog to page 5

All Imt Tool Solutions GmbH catalogs and technical brochures

  1. SAFETY DATA SHEET
    SAFETY DATA SHEET

    14  Pages

  2. ISOLOX - Thermoplastic Hot Dip Wax
    ISOLOX - Thermoplastic Hot Dip Wax

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.
Are you a buyer?
Are you a supplier?
About Us