Planetary gear IMS.700 Drive LN Our planetary gear from the Drive Series is customized for the special requirements of wheel drives. Due to its helical gearing it also meets increased demands on low noise performance. Low Noise (LN) Due to the use of helical gearing in the first stage particularly low noise. Maximum Power Density Little space and great performance - with our Drive Series this is no contradiction.. Long Service Life Persistent and reliable: planetary gears that keep their promises. Compact Overall Length No space? No problem! The compact design of our Drive Series makes it possible. Temperature Also ideally suited for demanding temperature ranges from -30° to +60°C. Reduction ratios Other ratios available on request Nominal Output Torque Acceleration Torque Time part 20 % during gearbox lifetime Emergency Stop Torque max. 50,000 cycles during gearbox lifetime Recommended wheel-Ø Specification point of data sheet is wheel-Ø180mm Radial load capacity per drive Weight to be moved max. 700 kg per drive Axial load per drive Time part 30 % during gearbox lifetime Nominal speed of vehicle Specification point of data sheet is wheel-Ø180mm Recomm. nominal initial speed Protection class Higher protection classes available on request

motor pre-assembly 6 x M8 for wheel mounting 8 x M10 for vehicle and motor mounting effective gearbox length (66.5) (71) All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods. For more detailed information, please contact us directly. The company always reserves the right to make technical modifi cations. For current status, please consult www.imsgear.com © IMS Gear SE & Co. KGaA | 07/2022 | Subject to change.