IMS.60 Pro MAX & IMS.60 Pro MAX LN

Product catalog summary

Specifications:
The IMS.60 Pro MAX and IMS.60 Pro MAX LN are planetary gear systems available in 1-stage, 2-stage, and 3-stage configurations. The permissible output torque is 14.0 Nm for 1-stage, 42.0 Nm for 2-stage, and 84.0 Nm for 3-stage. Gearbox efficiency decreases with more stages, from 0.80 for 1-stage to 0.70 for 3-stage. The maximum backlash is 0.60° for 1-stage, 0.65° for 2-stage, and 0.70° for 3-stage, with a special note for LN versions at 0.90° for plastic PL wheels only. The recommended initial speed is 3,000 U/min for all stages.

Performance and Design:
The planetary gear is designed for robustness and longevity, suitable for a wide range of applications. It operates effectively in temperatures from -30°C to +120°C. The Pro Series features a 60 mm outer diameter, combining performance with compactness. The Low Noise (LN) variant uses helical gearing in the first stage to reduce noise.

Load and Dimensions:
The maximum radial load for the middle output shaft is 320 N for 1-stage, 480 N for 2-stage, and 760 N for 3-stage. The maximum axial load is 70 N for 1-stage, 100 N for 2-stage, and 160 N for 3-stage. The maximum permissible fitting pressure is consistent at 1,300 N across all stages. The gearbox length varies slightly with each stage, with specific measurements provided for precise installation.

Reduction Ratios:
The document lists various reduction ratios for each stage configuration, with approximate values provided. Not all ratios are available from stock, and variations may occur due to non-standardized inspection methods.

Additional Notes:
All figures are approximate, and technical modifications may occur. For the most current information, consulting the IMS Gear website is recommended.

Catalog excerpts

Planetary gear IMS.60 Pro MAX IMS.60 Pro MAX LN Our planetary gear from the Pro Series with outer diameter 60 mm combines performance with robustness. In the radially screwed MAX version it stands for improved performance with less installation space. Due to easy adaptations of the configuration it is also available in Low Noise (LN) design. Low Noise (LN) Due to the use of helical gearing in the first stage available as Low Noise variant. Performance Powerful, long-lived and robust - the planetary gear convinces in a multitude of applications. Temperature Also ideally suited for demanding temperature ranges from -30° to +120°C. Perm. output torque TAB (Appl. factor CB = 1.0) Gearbox efficiency, approx. Recommended initial speed * LN: 0.90 °DEG. For plastic PL wheels only! Impact of 1st stage for 2-4 stage versions is negligible.

Open the catalog to page 1

a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods. For more detailed information, please contact us directly. The company always reserves the right to make technical modifi cations....

Open the catalog to page 2

IMS.60 Pro MAX & IMS.60 Pro MAX LN

IMS.60 Pro MAX & IMS.60 Pro MAX LN

Catalog excerpts

All IMS Gear catalogs and technical brochures