IMS.45 Pro MAX & IMS.45 Pro MAX LN

Product catalog summary

Overview: The document provides technical specifications and features of the IMS.45 Pro MAX and IMS.45 Pro MAX LN planetary gear systems. These systems are designed for robust performance in various applications, with a focus on efficiency and adaptability.

Specifications:

Permissible Output Torque: Varies by stage - 4.0 Nm for 1-stage, 12.0 Nm for 2-stage, and 25.0 Nm for 3-stage.
Gearbox Efficiency: Approximately 0.80 for 1-stage, 0.75 for 2-stage, and 0.70 for 3-stage.
Max Backlash: 0.70° for 1-stage, 0.75° for 2-stage, and 0.80° for 3-stage.
Recommended Initial Speed: 3,000 U/min for all stages.

Performance and Design:

The planetary gear is noted for its powerful, long-lived, and robust design, suitable for demanding temperature ranges from -30°C to +120°C.
The Pro MAX version offers improved performance with less installation space, and the LN variant provides a low noise option due to helical gearing in the first stage.

Load Capacities:

Radial Load: 200 N for 1-stage, 320 N for 2-stage, and 450 N for 3-stage.
Axial Load: 60 N for 1-stage, 100 N for 2-stage, and 150 N for 3-stage.
Max Permissible Fitting Pressure: 500 N for all stages.

Dimensions and Weight:

Weight: Approximately 0.7 kg for 1-stage, 0.9 kg for 2-stage, and 1.1 kg for 3-stage with motor flange C80.
Gearbox Length: Varies slightly by stage, with specific measurements provided for precise installation.

Reduction Ratios: A wide range of reduction ratios is available, with specific values provided for each stage and variant. Not all ratios are available ex-stock, and custom configurations may be required.

Additional Notes: All dimensions are approximate, and variations may occur due to non-standardized inspection and measurement methods. For the most current information and technical modifications, consulting the IMS Gear website is recommended.

Catalog excerpts

Planetary gear IMS.45 Pro MAX IMS.45 Pro MAX LN Our planetary gear from the Pro Series with outer diameter 45 mm combines performance with robustness. In the radially screwed MAX version it stands for improved performance with less installation space. Due to easy adaptations of the configuration it is also available in Low Noise (LN) design. Low Noise (LN) Due to the use of helical gearing in the first stage available as Low Noise variant. Performance Powerful, long-lived and robust - the planetary gear convinces in a multitude of applications. Temperature Also ideally suited for demanding temperature ranges from -30° to +120°C. Perm. output torque TAB (Appl. factor CB = 1.0) Gearbox efficiency, approx. Recommended initial speed * LN: 1.10 °DEG. For plastic PL wheels only! Impact of 1st stage for 2-4 stage versions is negligible.

Open the catalog to page 1

a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods. For more detailed information, please contact us directly. The company always reserves the right to make technical modifi cations....

Open the catalog to page 2

IMS.45 Pro MAX & IMS.45 Pro MAX LN

IMS.45 Pro MAX & IMS.45 Pro MAX LN

Catalog excerpts

All IMS Gear catalogs and technical brochures