IMS.42 Eco

Product catalog summary

Overview: The IMS.42 Eco is a plastic planetary gear from the Eco Series, designed for efficiency and economy with an outer diameter of 42 mm. It is suitable for demanding temperature ranges from -15°C to +65°C.

Specifications:

Permissible Output Torque: 0.8 Nm (1-stage), 2.0 Nm (2-stage), 4.0 Nm (3-stage)
Gearbox Efficiency: Approximately 0.80 (1-stage), 0.75 (2-stage), 0.70 (3-stage)
Max. Backlash: 1.70° (1-stage), 1.75° (2-stage), 1.80° (3-stage)
Recommended Initial Speed: 3,000 U/min for all stages

Load Capacities:

Max. Radial Load: 15 N (1-stage), 30 N (2-stage), 45 N (3-stage)
Max. Axial Load: 5 N (1-stage), 10 N (2-stage), 30 N (3-stage)
Max. Permissible Fitting Pressure: 150 N for all stages

Dimensions and Weight:

Weight: Approximately 150 g (1-stage), 180 g (2-stage), 215 g (3-stage)
Gearbox Length: Varies by stage with specific measurements provided for shortest possible and calculatory minimum lengths.

Reduction Ratios: Various ratios are available, ranging from 4:1 to 308:1, with approximate values provided.

Additional Notes: All figures are approximate and subject to change. Variations may occur due to non-standardized inspection and measurement methods. For detailed information and technical modifications, consulting the company directly is recommended.

Catalog excerpts

IMS GEAR Planetary gear Our plastic planetary gear from the Eco Series with outer diameter 42 mm combines efficiency with economy. Economy Modular system, optimized material mix: For economic solutions even in small quantities.

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedEco Eco Eco 1-stage Output side with sintered metal bearing 1-stage 2-stage 3-stage a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods....

Open the catalog to page 2

IMS.42 Eco

IMS.42 Eco

Catalog excerpts

All IMS Gear catalogs and technical brochures