IMS.35 Pro MAX & IMS.35 Pro MAX LN

Product catalog summary

Overview
The IMS.35 Pro MAX and IMS.35 Pro MAX LN are planetary gears designed for robust performance in various applications. The LN variant features helical gearing for reduced noise.

Specifications

Permissible Output Torque: 1-stage: 3.0 Nm, 2-stage: 7.5 Nm, 3-stage: 15.0 Nm
Gearbox Efficiency: 1-stage: 0.80, 2-stage: 0.75, 3-stage: 0.70
Max Backlash: 1-stage: 0.90° DEG, 2-stage: 0.95° DEG, 3-stage: 1.00° DEG
Recommended Initial Speed: 3,000 U/min for all stages
Temperature Range: -30°C to +120°C

Performance
The planetary gear is powerful, long-lived, and robust, suitable for demanding temperature ranges.

Design and Variants
The Pro MAX series features a 35 mm outer diameter and is available in a radially screwed MAX version for improved performance with less installation space. The LN variant offers low noise due to helical gearing.

Reduction Ratios
Various reduction ratios are available, ranging from 4:1 to 601:1, with specific ratios for each stage and variant.

Load Capacities

Max Radial Load: 1-stage: 160 N, 2-stage: 230 N, 3-stage: 300 N
Max Axial Load: 1-stage: 50 N, 2-stage: 80 N, 3-stage: 110 N
Max Permissible Fitting Pressure: 320 N for all stages

Dimensions and Weight

Weight: 1-stage: 275 g, 2-stage: 385 g, 3-stage: 500 g
Gearbox Length: 1-stage: 43 mm, 2-stage: 56.1 mm, 3-stage: 69.2 mm

Additional Information
All figures are approximate and subject to change. For detailed information, contact IMS Gear directly or visit their website.

Catalog excerpts

Planetary gear IMS.35 Pro MAX IMS.35 Pro MAX LN Our planetary gear from the Pro Series with outer diameter 35 mm combines performance with robustness. In the radially screwed MAX version it stands for improved performance with less installation space. Due to easy adaptations of the configuration it is also available in Low Noise (LN) design. Low Noise (LN) Due to the use of helical gearing in the first stage available as Low Noise variant. Performance Powerful, long-lived and robust - the planetary gear convinces in a multitude of applications. Temperature Also ideally suited for demanding temperature ranges from -30° to +120°C. Perm. output torque TAB (Appl. factor CB = 1.0) Gearbox efficiency, approx. Recommended initial speed * LN: 1.30 °DEG. For plastic PL wheels only! Impact of 1st stage for 2-4 stage versions is negligible.

Open the catalog to page 1

a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods. For more detailed information, please contact us directly. The company always reserves the right to make technical modifi cations....

Open the catalog to page 2

IMS.35 Pro MAX & IMS.35 Pro MAX LN

IMS.35 Pro MAX & IMS.35 Pro MAX LN

Catalog excerpts

All IMS Gear catalogs and technical brochures