IMS.33 Eco MAX LN

Product catalog summary

Overview: The IMS.33 Eco MAX LN is a planetary gear system designed for low noise and economic efficiency. It features a modular system with optimized material mix, suitable for demanding temperature ranges from -15°C to +65°C.

Specifications:

Permissible Output Torque: 0.8 Nm (1-stage), 2.0 Nm (2-stage), 4.0 Nm (3-stage)
Gearbox Efficiency: Approximately 0.80 (1-stage), 0.75 (2-stage), 0.70 (3-stage)
Max Backlash: 1.70° (1-stage), 1.75° (2-stage), 1.80° (3-stage)
Recommended Initial Speed: 3,000 U/min for all stages

Mechanical Properties:

Max Radial Load: 15 N (1-stage), 30 N (2-stage), 45 N (3-stage)
Max Axial Load: 5 N (1-stage), 10 N (2-stage), 30 N (3-stage)
Max Permissible Fitting Pressure: 150 N for all stages
Weight: Approximately 150 g (1-stage), 180 g (2-stage), 215 g (3-stage)
Gearbox Length: 49.1 mm (1-stage), 62.2 mm (2-stage)

Reduction Ratios: Various ratios are available, ranging from 4:1 to 601:1, with specific values for each stage. Not all ratios are available ex-stock.

Additional Information: All figures are approximate and subject to change. For detailed information and project-specific inquiries, contact IMS Gear directly. The company reserves the right to make technical modifications.

Catalog excerpts

IMS GEAR Planetary gear Our plastic planetary gear from the Eco Series with outer diameter 33 mm combines efficiency with economy. In the welded MAX version it stands for improved performance with less installation space; furthermore, it meets the increased demands on low noise performance. Economy Modular system, optimized material mix: For economic solutions even with small quantities.

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedEco MAX LN Eco MAX LN Eco MAX LN 1-stage * not all reduction ratios available ex-stock Output side with sintered metal bearing 1-stage 2-stage 3-stage a The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. Please contact us directly for your concrete project. Variations are possible and may arise for example due to non-standardized inspection and measurement methods. For more detailed information, please contact us directly. The company...

Open the catalog to page 2

IMS.33 Eco MAX LN

IMS.33 Eco MAX LN

Catalog excerpts

All IMS Gear catalogs and technical brochures