IMS.32 Pro & IMS.32 Pro LN

Product catalog summary

Overview: The IMS.32 Pro and IMS.32 Pro LN are planetary gears designed for performance and robustness, with an outer diameter of 32 mm. They are available in standard and Low Noise (LN) variants, the latter featuring helical gearing in the first stage for reduced noise.

Specifications:

Permissible Output Torque: 0.75 Nm (1-stage), 2.25 Nm (2-stage), 4.50 Nm (3-stage)
Gearbox Efficiency: Approximately 0.80 (1-stage), 0.75 (2-stage), 0.70 (3-stage)
Max Backlash: 1.50° (1-stage), 1.55° (2-stage), 1.60° (3-stage); LN variant: 2.00° for plastic PL wheels
Recommended Initial Speed: 3,000 U/min for all stages
Temperature Range: Suitable for -30°C to +120°C

Reduction Ratios: Various ratios are available, ranging from 4:1 to 308:1, with specific values for each stage.

Load Capacities:

Radial Load: 40 N (1-stage), 70 N (2-stage), 100 N (3-stage)
Axial Load: 10 N (1-stage), 20 N (2-stage), 30 N (3-stage)
Max Permissible Fitting Pressure: 120 N for all stages

Dimensions:

Weight: Approximately 160 g (1-stage), 210 g (2-stage), 260 g (3-stage)
Gearbox Length: Varies by stage, with specific lengths provided for optimal motor connection

Additional Information: All figures are approximate and subject to change. For precise details and project-specific inquiries, direct contact with IMS Gear is recommended. The company reserves the right to make technical modifications.

Catalog excerpts

Planetary gear IMS.32 Pro IMS.32 Pro LN Our planetary gear from the Pro Series with outer diameter 32 mm combines performance with robustness. Due to easy adaptations of the configuration all Pro gears are also available in Low Noise (LN) design. Low Noise (LN) Due to the use of helical gearing in the first stage available as Low Noise variant. Temperature Also ideally suited for demanding temperature ranges from -30° to +120°C. Perm. output torque TAB (Appl. factor CB = 1.0) Gearbox efficiency, approx. Recommended initial speed * LN: 2,00 °DEG. For plastic PL wheels only! Impact of 1st stage for 2-4 stage versions is negligible.

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedPro / Pro LN Pro / Pro LN Pro / Pro LN 1-stage Output side with ball bearing (2Z) 1-stage 2-stage 3-stage a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and...

Open the catalog to page 2

IMS.32 Pro & IMS.32 Pro LN

IMS.32 Pro & IMS.32 Pro LN

Catalog excerpts

All IMS Gear catalogs and technical brochures