IMS.32 Eco

Product catalog summary

Overview: The IMS.32 Eco is a plastic planetary gear system designed for efficiency and economy, with an outer diameter of 32 mm. It is suitable for various applications, including those with demanding temperature ranges from -15°C to +65°C.

Specifications:

Permissible Output Torque: 0.4 Nm (1-stage), 1.0 Nm (2-stage), 2.0 Nm (3-stage)
Gearbox Efficiency: Approximately 0.75 (1-stage), 0.70 (2-stage), 0.65 (3-stage)
Max Backlash: 1.90° (1-stage), 1.95° (2-stage), 2.00° (3-stage)
Recommended Initial Speed: 3,000 U/min for all stages

Load Capacities:

Max Radial Load: 15 N (1-stage), 30 N (2-stage), 45 N (3-stage)
Max Axial Load: 5 N (1-stage), 10 N (2-stage), 15 N (3-stage)
Max Permissible Fitting Pressure: 150 N for all stages

Weight: Approximately 100 g (1-stage), 115 g (2-stage), 130 g (3-stage)

Reduction Ratios: Various ratios are available, ranging from 4:1 to 308:1, depending on the stage configuration.

Dimensions:

Gearbox Length: 25 mm (1-stage), 34.57 mm (2-stage), 44.07 mm (3-stage)
Minimum Length: 29.6 mm (1-stage), 39.1 mm (2-stage), 48.6 mm (3-stage)

Additional Information: All figures are approximate and subject to change. For precise details and project-specific inquiries, contacting IMS Gear directly is recommended. The company reserves the right to make technical modifications.

Catalog excerpts

IMS GEAR Planetary gear Our plastic planetary gear from the Eco Series with outer diameter 32 mm combines efficiency with economy. Economy Modular system, optimized material mix: For economic solutions even in small quantities.

Open the catalog to page 1

IMS GEARCurrent reduction ratios i roundedEco Eco Eco 1-stage Output side with sintered metal bearing 1-stage 2-stage 3-stage a Shortest possible gear length, can only be realized if motor design directly matches our ring gear. b The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods....

Open the catalog to page 2

IMS.32 Eco

IMS.32 Eco

Catalog excerpts

All IMS Gear catalogs and technical brochures