IMS.28 Pro MAX & IMS.28 Pro MAX LN

Product catalog summary

Overview: The IMS.28 Pro MAX and IMS.28 Pro MAX LN are planetary gear systems designed for high performance and robustness, featuring a compact design with an outer diameter of 28 mm. The LN variant offers reduced noise through helical gearing.

Specifications:

Output Torque: 1-stage: 0.75 Nm, 2-stage: 2.25 Nm, 3-stage: 4.50 Nm
Gearbox Efficiency: 1-stage: 0.80, 2-stage: 0.75, 3-stage: 0.70
Max Backlash: 1-stage: 1.50°DEG, 2-stage: 1.55°DEG, 3-stage: 1.60°DEG (LN: 2.00°DEG for plastic PL wheels)
Recommended Speed: 3,000 U/min for all stages
Temperature Range: -30°C to +120°C

Performance:

Reduction Ratios: Various ratios available from 4:1 to 308:1, with specific values for each stage.
Load Capacities: Radial load: 1-stage: 40 N, 2-stage: 70 N, 3-stage: 100 N; Axial load: 1-stage: 10 N, 2-stage: 20 N, 3-stage: 30 N
Weight: 1-stage: 160 g, 2-stage: 210 g, 3-stage: 260 g

Design Considerations:

Output side equipped with ball bearing (2Z).
Max permissible fitting pressure is 120 N for all stages.
Gearbox length varies with stages: 1-stage: 28.75 mm, 2-stage: 38.4 mm, 3-stage: 48 mm.

Additional Information: All figures are approximate and subject to change. For precise details and project-specific inquiries, contact IMS Gear directly or visit their website.

Catalog excerpts

Planetary gear Our planetary gear from the Pro Series with outer diameter 28 mm combines performance with robustness. In the radially pinned MAX version it stands for improved performance with less installation space. Due to easy adaptations of the configuration it is also available in Low Noise (LN) design. * LN: 2.00 °DEG. For plastic PL wheels only! Impact of 1st stage for 2-4 stage versions is negligible.

Open the catalog to page 1

a The calculatory minimum length of the gear is indicated on condition of an optimum connection of flange and motor. Please contact us directly for your concrete project. IMS Gear SE & Co. KGaA | 07/2022 | Subject to change. All figures are approximate values. Variations are possible and may arise for example due to non-standardized inspection and measurement methods. For more detailed information, please contact us directly. The company always reserves the right to make technical modifi cations. For current status, please consult www.imsgear.com

Open the catalog to page 2

IMS.28 Pro MAX & IMS.28 Pro MAX LN

IMS.28 Pro MAX & IMS.28 Pro MAX LN

Catalog excerpts

All IMS Gear catalogs and technical brochures